Setup; Installation - Hall Research Technologies HD-AUD-IO User Manual

3.0 Setup

Installation

• Optionally,
a source is NOT required to embed audio onto the HDMI output. If there is
no HDMI source signal, the HDMI Output will be a 640x480 black screen.
• Optionally,
A sink is not required to extract the HDMI Input Audio.
• Optionally,
device.
• Optionally,
device (e.g., headphones, assistive listening devices).
• Optionally,
connector(s).
• Optionally,
strip to a compatible controller (e.g., PC or RS-232 controller).
• Optionally,
compatible normally open dry contact. This can be configured to mute the
audio and/or video. Factory default is to mute the audio output. (Closed =
MUTE)
• Optionally,
brackets are configurable for different mounting orientations.
• Connect the included power supply to the 5V DC connector.
connect an HDMI source to the HDMI IN connector. Note that
connect an HDMI compatible sink to the HDMI OUT connector.
connect the SPDIF OUT audio output to a compatible audio
connect the L/R OUT analog audio output to a compatible
connect the audio to embed to the SPDIF IN and/or L/R IN
Connect the TX, RX and GND contacts on the Control terminal
Connect the DI contact on the Control terminal strip to a
use the included rack mount brackets and hardware. The
HDMI 2.0 Audio Inserter & Extractor
© Copyright 2019 Hall Research, Inc.
5