Download Print this page

Danner 03802 Assembly Instructions page 2

Advertisement

WARNINGS:
• This product is for INDOOR use only.
• Pump must ALWAYS be submerged in water. DO NOT RUN DRY.
• Keep ALL electrical connections out of the water.
• Never plug into outlet if any part of the product appears to be damaged.
• Check for leaks after initial setup and occasionally afterwards.
• DO NOT use any household cleaners on painted surfaces.
• ALWAYS use a "Drip Loop" when operating the pump (see Fig.1).
MAINTENANCE:
• Change water periodically to reduce scaling & mineral buildup.
• Check water level and add as necessary to maintain proper level.
• Drain all water from basin if fountain will be out of service for
an extended period of time.
• Remove pump from fountain periodically and rinse with fresh
water to remove any debris or buildup.
• Rinse basin periodically with tap water and wipe away any buildup.
• Use of distilled water will prevent mineral buildup.
E. G.
Danner will repair or replace any unit found to be mechanically defec-
tive within 90 days of purchase. For warranty issues please contact Danner
Customer Service for information before returning product. A dated proof
of purchase must be presented to validate any warranty claim. Damages or
injuries resulting from negligence, abuse or misuse of this product are
excluded from this warranty. This warranty gives you speci c legal rights
and you may have other rights which vary from state to state.
DANNER MFG. INC. • Islandia, NY 11749-1489 • Phone 631-345-5261 • Visit our website at www.Dannermfg.com
Care and Operating Instructions
Tabletop Fountain
Limited Warranty
DRIP
LOOP
SAVE THESE
INSTRUCTIONS

Advertisement

loading

This manual is also suitable for:

0380103800