Line-In Mode - SACKit MOVEit X User Manual

LINE-IN MODE

Play music via the included audio cable by plugging it into the LINE IN input
on the back of the MOVEit X speaker and into your device. The MOVEit X
speaker will automatically change to Line-in mode when you plug the audio
cable into the speaker.
Control your music via the on-speaker controls:
• Adjust volume: short press or long press "Vol-" and "Vol+" buttons to
adjust volume.
• Mute: Stop playing music from the speaker by pressing the "Play/
Pause" button
PHONE CHARGING
You can charge your phone from the USB port on the back of the MOVEit
X speaker. All you need to do is connect the speaker and your phone via a
USB charging cable (not included), and your phone will automatically start
charging. If charging does not automatically start, please press the "Power"
button. The USB port is designed for charging mobile devices only. It
supplies 5V DC at a charging current of up to 1000 mA.
Please note: Charging your phone will reduce battery life if the speaker is
not plugged into a power outlet.
STEREO PAIRING: CONNECTING TWO MOVEit X
SPEAKERS
If you have two MOVEit X speakers it is possible to create a stereo pair
with one speaker playing left channel, and one speaker playing right
channel.
1. Power on both speakers clicking the Power button
2. Click the Bluetooth button three times to enter pairing mode (the
indicator light will flash in correct pairing mode). Repeat this for both
speakers
3. The speakers will connect in a few seconds. A constant light on one
speaker and a slowly flashing speaker on the other indicates correct
connection.
5