Table of Contents Set up Sage ····································································· 04 ············································· 04 Compatibility with Mobile Download the APP ······················································· 04 Wear Sage ·································································· 05 ····················································· 07 Remove a wristband Charge your tracker ······················································ 08 Pair with Phone ··························································· 09 ····················································· 10 Check connect state Do not disturb mode ····················································...
Set up Sage Welcome to moreFit Sage, an all-day companion that lasts 7+ days. Compatibility with Mobile Android 4.4 & above IOS 8.0 & above NOT SUPPORT: Windows/Amazon Kindle/Amazon Fire/PC/ Tablet/Ipad/Samsung J1/J2/J3/J5/J7 Download the APP Search "VeryFitPro" App on the App store or Google Play store.
For optimized heart-rate tracking while exercising: · Try wearing Sage higher on your wrist during exercise for an improved fit and more accurate heart-rate reading. Many exer- cises, such as bike riding or weight lifting, cause you to bend your wrist frequently, which can interfere with the heart-rate signal if the tracker is lower on your wrist.
Page 6
· Make sure the tracker is in contact with your skin. · Don't wear your tracker too tight; a tight wristband restricts blood flow, potentially affecting the heart-rate signal. The tracker should be slightly tighter (snug but not constricting) during exercise. With high-intensity interval training or other activities where your wrist is moving vigorously and non-rhythmically, the movement may limit the sensor's ability to provide a heart-rate...
Pair with Phone Steps: 1). Make sure your phone bluetooth is ON. 2). Open "VeryFitPro" App, on the bottom toolbar, go to "Device" tab. 3). Select "Bind Device", search the device named ID151 and tap to connect,then click "Confirm Device" 4).Keep your tracker awake while searching, the tracker vibrates and synchronize time with your phone after paired.
Check connect state connect disconnect Do not disturb mode Steps: Go to "VeryFitPro" App→ Device→More→Non disturb mode→ Open→Set non-disturb time period → Non disturb mode - 10 -...
Disconnect from phone Steps: Open "VeryFitPro" App→Device→Unbind→Yes Forget device from phone bluetooth Steps: Go to phone's settings→ Bluetooth→ Click → Forget This Device→ Forget Device ID151 ID151 - 11 -...
Sports Underway Mode Sports main Real-time Steps/Calories Distance/Pace interface heart rate Press to enter sport mode. Long Press 2s to exit sport mode. - 14 -...
Sports pause mode This function can only be started through APP which can realize the pause/starting/exit functions while the tracker can only control the exit function. Sports exit mode If the sports last less than 1 minute, the user will be reminded of not saving the data. - 15 -...
Page 16
If the sports last more than 1 minute, the Sports End Reminder will be displayed. - 16 -...
Activity display Types of Sports mode can be selected in App. App can handle 3 types of track recording sports and 14 types of other activities can change in App. - 17 -...
Matters Reminder in Sports Mode Reminder of exiting from sports mode upon a period of no activity. Reminder of full-ram force quit When the memory of fitness tracker is full of sports data, the user will be reminded of exiting from the Sports Mode.
Matters Reminder in Sports Mode The reminder will be available soon Stopwatch Mode [Press and hold the touch key for 2s]:Exit the stopwatch mode - 19 -...
Alarm Clock Alarm clock function should be turned on in App for the alarm clock to be displayed. Start Close Meeting Wake up Party Appointment Sleeping Exercise Medicine taking Alarm Clock : The relevant settings need to done in the App. - 20 -...
Set an alarm Set, manage, and delete alarms in the app . Set alarm steps: Go to "VeryFitPro" APP→Device→Alarm Alert →click “+” →Set time/date/label→click“√” Dismiss an alarm When an alarm goes off, the tracker vibrates for 20 seconds. To dismiss the alarm, tap the key button for 2 seconds - 21 -...
Low battery reminder Charge the device when the battery power is under 15%. The battery will be affected, if recharged it after it is completely die. Ultra-low battery reminder No other modes can be entered on this page. - 23 -...
Device Error Notification When the device is detected with an abnormality, the interface herein will be displayed each time the device is opened. Status Code: -01 means the abnormality of acceleration sensor -02 means the abnormality of heart rate sensor -03 means the abnormality of touch key IC -04 means the abnormality of flash - 24 -...
Track a daily activity goal Sage tracks your progress toward a daily activity goal of your choice. When you reach your goal, the tracker vibrates and shows a celebration. - 28 -...
Choose a goal Set a goal to help you get started on your health and fitness journey. To begin, your goal is 15,000 steps per day. Choose to increase or decrease the number of steps, or to change your goal to active minutes, distance traveled, or calories burned. Target completion reminder When some goals are achieved, shake the fitness tracker to get the interface of target...
Track your sleep Wear Sage to bed to automatically track your time asleep and sleep stages (time spent in wake-up times, light sleep, and deep sleep). To see your sleep stats, check the app when you wake up. - 30 -...
Heart Rate Detection Sage will measure the heart rate of the user in the heart rate measurement interface. After measurement, the result will be displayed. - 31 -...
Wearing and Maintenance Our products are designed for you to wear throughout the day. So please follow a few brief instructions when you are wearing and maintaining your smart devices. To keep your wristband clean and your skin comfortable, we put forward the following tips: Regularly clean your wrist and the smart wristband, especially after sweating in the exercise or being exposed to substances...
Specifications IOS system 8.2 or above; System requirements Android system 4.4 or above; Support bluetooth with 4.0 verson Model No. ID151 Battery Capacity 90mAh Working Voltage 3.7V Host weight bout 23.5g Sync Bluetooth 4.2 -20℃- 40℃ Working temperature 7days Working Time 2402-2480MHz Product frequency band Maximum transmit power...
Return policy and warranty To learn more about your smart tracker and warranty, please visit www.more-fit.com. facebook: Morefit www.more-fit.com - 35 -...
Need help?
Do you have a question about the Sage and is the answer not in the manual?
Questions and answers