Do you have a question about the WS-Q-03 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for TDC USA WS-Q-03
Page 1
ELECTRIC FIREPLACE WITH MANTEL MODEL WS-Q-03 OWNERS MANUAL Only use this heater as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury. WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product.
IMPORTANT SAFETY INFORMATION! WARNING ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. ...
Page 3
WARNING l Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! l ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. l ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.
PREPARATION Remove all parts and hardware from the carton and place them on a clean, soft, and dry surface. Make sure all parts are dry, and the power cord and plug are not damaged. See IMPORTANT SAFETY INFORMATION on pages 2 and 3. ...
Page 5
ASSEMBLY INSTRUCTIONS ALWAYS make sure the unit is plugged before beginning assembly! NEVER move or clean the heater, or change the bulb, while it is plugged in. 1) Using the dril bit to drill two holes ( a, b) with distance of 37.6” (955mm) on the wall surface.
OPERATION When the heat function is used for the first time, a slight odor may be NOTICE present. This is normal and should not occur again unless the heater is not used for an extended period of time. BUTTON ACTION / FUNCTION INDICATION / RESULT 1.
Cleaning Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these will damage the metal. Glass: Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth. ...
Troubleshooting WARNING DISCONNECTED THE APPLIANCE COMPLETELY AND LET COOL PRIOR TO ANY SERVICE. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. Problem Possible Cause Solution 1. Reset switch by turning main 1. Fireplace turns off 1. Fireplace has overheated and will not turn on.
Page 9
。 Distributed by TDC USA, Inc., Fair白eld, NJ07004 2017 All Rights Reserved. Made in China. Item 32405 Electric Fireplace With Mantel ?/Comments: 1 8898 9 am 5 pm EST ” ” 唰 伽 www.tdcusainc.com...
Need help?
Do you have a question about the WS-Q-03 and is the answer not in the manual?
Questions and answers