Safety Warnings - Sandstrom SANDPRES Quick Start Manual

Safety Warnings

Class 2 Laser Product:
• This product complies with IEC 60825-1:2007, Class 2 laser
product.
• Your product complies with CE rules.
• This product has no serviceable parts. Use of controls or
adjustments of procedures other than the Quick Start Guide
may result in danger.
• Do not stare directly into the beam.
Wireless Devices:
• Before boarding any aircraft or packing a wireless device in
luggage that will be checked in, remove the batteries from
the wireless device.
• Wireless devices can transmit radio frequency (RF) energy, whenever batteries
are installed and the wireless device is turned on (If it has an On/Off switch).
Battery-Powered Devices:
• Improper use of batteries may result in battery fluid leakage, overheating, or
explosion.
• Released battery fluid is corrosive and may be toxic. It can cause skin and eye
burns, and is harmful if swallowed.
• Don't disassemble the presenter or remove any parts.
• Don't put the presenter into water or any liquid.
• Don't use the presenter close to heat sources or expose to high temperatures.
• Don't use the presenter where strong electromagnetic waves are present.
Strong electromagnetic waves will cause damage to the presenter.
• Keep the presenter away from direct sunlight, moisture, dirt or abrasive
chemical products (cleaning products etc).
To Reduce the Risk of Injury :
• Keep batteries out of the reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
• Do not mix new and old batteries or batteries of different types.
• Do not allow metal objects to touch the battery terminals on the device; they
can become hot and cause burns.
3