Nevir NVR-2739DVD-PCUT Instruction Manual page 18

Press SETUP button and enter into the main page.
The screen shows:
System Config
TV Setting
Video Setting
Audio Setting
Language
Parent Control
Time Setting
System Info
TV Setting
Press "OK" button in TV system and TV Type.
TV System
The TV System consists three NSTC\PAL\AUTO.
One of them can be choosed, according to your
TV system.The machine doesnot support SECAM.
TV TYPE
When the player is connected with a common TV
screen picture will show on the full screen
.
part may be cut off automatically
4:3PS
Select it when the player is connected with a common TV,
wide screen picture mayshow on the screen with black
strip on the topand bottom of the screen.
Wide
Select when the player is connected to a wide screen TV.
Video Setting
Press "OK" button in Video Setting, the screen show:
Brightness
6
Contrast 6
HUE 6
Saturation 6
Audio Setting
Press "OK" button in Video Setting, you can set Autio Out
and you can choose SPDIF/RAW、SPDIF/PCM、SPDIF/OFF,
You could choose anyone according to your needs.
, wide
, while some
Language
Press "OK" button in Language, you can set OSD Language
and you can choose English,Deutsch,Espahol,Francals,
Portuguese,Italiano.
You could choose anyone according to your needs.
Parent Conrtol
Press "OK" button in Parent Conrtol, you can perss "OK"
change pin and Channel Lock.
Time Setting
Press "OK" button in Language, you can set Time Zone
and Sleep.
System Info
Press "OK" button in Language, You can view the DVB
Software Information.
Press SETUP button and enter into the main page.
The screen shows:
Installation
Auto Scan
Manual Scan
Default Setup
Auto Scan
The Auto Scan consists: Select Area and Start Scan.
Area consists: Spain, Holland, Australia, Singapore, China,
TWN, Germany, England, Italy, France.
You could choose anyone according to your needs.
Start Scan : press ENTER button start.
Manual Scan
You can selcet Area , Scan Type and Start Channel ,then
press ENTER button start scan.
Default Setup
Each funtion of the machine could be resumed to the
default data the same with the original factory setting.
Press SEUP to exit.
16