OHSEN 1610 Instructions

OHSEN (Model 1610) DIGITAL WATCH INSTRUCTIONS
Four buttons on this watch are labelled: LIGHT, MODE, RESET, and START
TO SELECT THE DISPLAY MODE
Push the Mode Button in order to select one of the following four display modes in the following
order: Normal Time -> Stop Watch -> Alarm Reset, -> Time Reset Mode
In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none
flash). If the Alarm and Hourly Chime icons are not displayed, the Alarm and Hourly Chime are
turned off.
TO DISPLAY DAY OF WEEK, HOUR, MINUTE, SECOND AND WHETHER THE ALARM AND HOURLY
CHIMES ARE ON:
Push the Mode button until no icon is flashing. The Alarm and Hourly Chimes are off if no Alarm or
Chime icon is displayed beside the Second display.
TO DISPLAY THE DAY, MONTH AND DAY OF WEEK AND WHETHER THE ALARM AND HOURLY
CHIMES ARE ON:
In Normal Time Mode, push the Start button. The Alarm and Hourly Chimes are off if no Alarm or
Chime icon is displayed.
TO DISPLAY THE ALARM TIME
In Normal Time Mode, push the Reset button. The P or A beside the Alarm Time indicates PM or AM
time. The P or A below the Alarm Time indicates a 12 hour clock; an H indicates a 24 hour clock.