Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gembird KBS-1400
Summary of Contents for Gembird KBS-1400
- Page 1 UPS with AVR UPS with automatic output voltage regulation...
- Page 2 No part of this manual may be reproduced, transmitted or translated in any language in any form, by any means, without the prior written permission of Gembird Electronics Ltd. Gembird Electronics makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the product, the software, personal computers or peripheral devices.
- Page 3 UPS with AVR UPS User manual Introduction Thank you for buying the Gembird® UPS with automatic output voltage regulation! This manual will help you install and use it properly.
-
Page 4: Package Contents
UPS with AVR Features Automatic output voltage regulation (AVR) USB controlling interface (for advanced models) LED status indication Short circuit protection Surge, spike and lightning protection Audible and visual alarms Overcharge and over discharge protection ... -
Page 5: Specifications
UPS with AVR Specifications... -
Page 6: Remarks About Safety
UPS with AVR Remarks about Safety In order to keep safe in using the UPS, please comply with the following: Please charge the battery at least 12 hours before the UPS is in operation. After the battery is discharged or over three months without operation, the battery should be charged immediately for at least 12 hours, ensuring the battery is full and avoiding any unnecessary damage of the battery. - Page 7 UPS with AVR cause danger of electric shock or fire when the UPS short-circuits. When the UPS work looks abnormal, please cut off power immediately and turn to experts or the dealer for help. Do not overload the UPS. Otherwise, it would cause danger. ...
- Page 8 UPS with AVR support systems. ALARM: The UPS must be connected to the grounded AC mains!
-
Page 9: Working Principle
UPS with AVR Working Principle In AC mode When UPS is in normal working mode, AC goes through the filter and the harmful waves are filtered. After that, AC charges the battery and meanwhile, passes UPS AVR and the filter and provide power for the equipment. AC Failure When AC fails, the battery will supply power to the inverter and then passes filter and provide power for the equipment, ensuring the continuous power supply. -
Page 10: Battery And Charging
UPS with AVR Battery and Charging When the UPS is connected to AC, the charger will charge the battery fully in about 10 hours. When the battery is used up, please charge the battery immediately so that to prolong the life of the battery. -
Page 11: Main Features
UPS with AVR Main Features Unattended Operation Please connect the UPS to AC and press the ON button on the front panel, the UPS is turned on and the AC outputs stabilized voltage. When AC fails, UPS will supply power to the equipment immediately. And when the battery is used up, UPS will turn off automatically. - Page 12 UPS with AVR inverter working mode). Interface Port (with function of intelligent monitoring of computer): This series UPS can have DB9 or USB interface port, which can service for such systems as MS-DOS, WINDOWS, NOVELL, UNIX, LAN, etc and keep files and monitor UPS to turn off automatically.
- Page 13 UPS with AVR When the battery is nearly used up, the UPS will alarm automatically and the beep frequency is once every 2 seconds. When the battery is really used up, the UPS will alarm for a very long time and after 20 seconds, it will turn off automatically.
- Page 14 UPS with AVR Overview The advanced models of UPS have USB or RS-232 interface port to be controlled by the computer, extra surge protected sockets (telephone/fax).
- Page 15 UPS with AVR Installation and Operation Shut down the load (for example PC), pull out power gird Put UPS on the proper position(following the manual) Connect load (for example PC) to the UPS Put the plug to the AC power socket Suggestion: OFFLINE UPS is the power supply for the computer monitor and hard disk (CD) etc.
- Page 16 UPS with AVR Connect to AC: press the panel switch turning on the UPS, the green LED and yellow LED light, then you can turn on your computer etc. Battery mode press the panel switch turning on the UPS, the red LED lights then you can turn on your computer etc.
-
Page 17: Preventative Maintenance
UPS with AVR Maintenance Preventative Maintenance Preventive Maintenance ensures the longer Service life of UPS. Please check the following steps every month: Turn off the UPS; Make sure the airway not blocked; Make sure that the UPS surface is not covered by dust; Check whether the input, output and battery connecting lines are firm or not and the insulation is effective or not;... -
Page 18: Battery Maintenance
UPS with AVR Battery Maintenance The UPS contains sealed lead-acid maintenance-free battery. The bad environment, the high discharge frequency, the high temperature, etc will dramatically reduce the use life of battery. The use life of battery will also reduce even it is not used. It is suggested to discharge the battery once every 3 months when AC is normal. -
Page 19: Handling Of Abnormity
UPS with AVR discharge time will decrease). When the discharge time is 80% of the initial discharge time, the performance of the battery will be weakened faster and accordingly, the checking frequency of the battery should change from once every half year to once every month. - Page 20 UPS with AVR Phenomenon Trouble Shooting Battery fails to supply power. Check whether the battery isn't charged charge enough Check whether the UPS is not turned on correctly? UPS doesn't turn to AC (the input plug of Check whether the fuse is broken? The fuse the UPS has been plugged into the AC is placed on the UPS back panel.
Need help?
Do you have a question about the KBS-1400 and is the answer not in the manual?
Questions and answers