Advertisement
APS
APS
User's Manual
User's Manual
※ APS (Auto Pumping System) has been upgraded for better product performance.
Please refer to this manual for use.
Previous model
APS Components
Pump Body
How to Assemble APS (Automatic Pumping System)
The silicone tube may become folded, causing a blockage.
Please ensure that any blockages are removed by gentle
pulling both ends of the tube before assembly.
Cut the silicone tube to 1m and 0.5m lengths.
(Auto Pumping System)
(Auto Pumping System)
UPGRADE
Pumping gear
(Motor)
Nipple holder
(Both sides)
APS Power Cable
* Complaint Department : 82-55-337-2561
* E-mail Receipt : sales@autoelex.com
OUT
Latest models
7cm +0.2/-0 (Diameter : Ø2.6 × 3.5)
Silicon Tube and Nipple (2pcs.)
Cap
CUT
0.5m
Assemble
'OUT' part
IN
1.5m (Diameter : Ø2.6 × 3.5)
Silicon Tube
1m
Assemble
'IN' part
Ver. 1.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Rcom APS
- Page 1 (Auto Pumping System) (Auto Pumping System) User’s Manual User’s Manual Ver. 1.0 ※ APS (Auto Pumping System) has been upgraded for better product performance. Please refer to this manual for use. UPGRADE Previous model Latest models APS Components Pumping gear 7cm +0.2/-0 (Diameter : Ø2.6 ×...
- Page 2 Assemble the cap onto the pump body. Please make sure silicone tubes do not get jammed in the cap. Connect the APS power cable onto the power inlet at the back of the pump body. Please refer to booklet manual page 16 for how to assemble the APS with the incubator.
Need help?
Do you have a question about the APS and is the answer not in the manual?
Questions and answers