1. Manuals
  2. Brands
  3. Bridgesecure Technologies Manuals
  4. Telephone Accessories
  5. BridgeSecure
  6. Quick start manual

Bridgesecure Technologies BridgeSecure Quick Start Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

LOCATE THE ALARM PANEL TELEPHONE CABLE

The alarm panel telephone cable is usually going out of the alarm system
panel and connected to a telephone box as shown. Some systems have a
panel and keyboard integrated in the same enclosure.
Visit the FAQ section at
and connecting this cable to BridgeSecure.

INSTRUCTIONS

1. Once found, disconnect the alarm panel telephone cable from the telephone box.
2. Place your BridgeSecure device near the alarm panel telephone cable plug.
3. Connect the cables following the diagrams that correspond to your situation.
4. If you are using a Wi-Fi adapter, follow its instructions to make it work with your Router.
5. Make sure your computer, tablet, or cellphone is connected to the same local network
as your BridgeSecure device.
6. Open your web browser and go to the BridgeSecure configuration pages at
bridgesecure/
7. Fill the BridgeSecure configuration pages. Each page contains contextual help.
8. Generate alarms from your alarm system to make sure that you receive your alerts.
The BridgeSecure
properly.
If you don't find the cable, your alarm system may never have been connected to an
alarm central.
or use the device finder at
Tools
page allows you to check that the whole system is working
Then use the supplied cable and make the connections as indicated here.
Get help from an alarm system installer to program your alarm system so
that it generates calls for all types of alarms. Ask for the open/close access
notifications to be included. The protocol used must be Contact ID.
Alarm Panel Telephonic Cable (included)
QUICK START GUIDE
https://bridgesecure.com/
https://bridgesecure.com/finder/
for more help finding
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BridgeSecure and is the answer not in the manual?

Questions and answers

Summary of Contents for Bridgesecure Technologies BridgeSecure

  • Page 1 4. If you are using a Wi-Fi adapter, follow its instructions to make it work with your Router. 5. Make sure your computer, tablet, or cellphone is connected to the same local network as your BridgeSecure device. 6. Open your web browser and go to the BridgeSecure configuration pages at bridgesecure/ or use the device finder at https://bridgesecure.com/finder/...
  • Page 2 CONNECTION WITH CABLES ONLY Existing Router Wall power adapter (included) Network cable (included) or longer Alarm Panel network cable Telephone (sold separately) Cable Existing Alarm Panel CONNECTION WITH A Wi-Fi ADAPTER Wall power adapter Wi-Fi Adapter Network cable (included) (sold separately) (included) Alarm Panel Telephone...
  • Page 3 CONNECTING TO AN EXTERNAL PHONE LINE Not required if using a VoIP account programmed in BridgeSecure (Softphone) Existing IP telephone line Silver telephone cable (included) or longer network cable (sold separately) Telephone cable extension or inside wall wiring (if needed)
  • Page 4 OPTIONAL UNINTURRUPTIBLE POWER SUPPLY (UPS) If using an uninterruptible power supply, make sure you plug all power adapters of BridgeSecure, Wi-Fi Adapter (if applicable), Modem and Router in the UPS power outlets. The Uninterruptible Power Supply will ensure continued power even during power outages.

Table of Contents