1 Description and operation 1.1 Function of the product Stereo video camera "the BlackBird" (further in the text "camera" or "product") allows to get three- dimensional image. By using two identical parts, the camera generates a signal in interlaced 3d format.
Page 3
The appearance of video camera and interface cable is presented in figure 1. Figure 1. The appearance of the camera «BlackBird» The board of the camera consists of two parts, the main 6 and additional 4. On the main part there are the interface 9 and interboard connectors 5.
Operating temperature of the camera is in the range from -20 to +70 degrees Celsius. If you want to use at other temperatures, it is needed to organize additional cooling or heating to ensure an acceptable temperature. Version 1.3.3 «the BlackBird» (21.03.2014) http://www.fpv3dcam.ru...
Page 5
Note! Observe the polarity and accuracy of connection to the power source. Connection of the supply voltage output wrong polarity will lead damage camera. Video positive negative Figure 3. Connection diagram of the camera Version 1.3.3 «the BlackBird» (21.03.2014) http://www.fpv3dcam.ru...
Page 6
The object will be visible on the screen plane. If the optical axis of the lens intersect behind the object, it will be visible in front of the screen, and if before the object - behind the screen. Version 1.3.3 «the BlackBird» (21.03.2014) http://www.fpv3dcam.ru...
Page 7
Contact technical support scheme Short circuit interboard Check the plug connection between connector The consumption is more cards Short circuit in the interface cable 150 mA. Replace the interface cable Malfunction camera's Contact technical support scheme Version 1.3.3 «the BlackBird» (21.03.2014) http://www.fpv3dcam.ru...
Need help?
Do you have a question about the BlackBird and is the answer not in the manual?
Questions and answers