Safety Recommendations - Teleorigin RB600 User Manual

13. Safety Recommendations

Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the following
areas:
• Where it can interfere with other electronic devices in environments such as
hospitals, airports, aircrafts, etc
• Where there is a risk of explosion such as gasoline stations, oil refineries, etc
It is the sole responsibility of the user to enforce the country's regulations and the
specific environment regulation.
Do not disassemble the product; any sign of tampering will compromise the warranty
validity.
We recommend following the instructions of the hardware user guides for a correct
wiring of the product. The product has to be supplied with a stabilized voltage source and
the wiring has to be conform to the security and fire prevention regulations.
The product has to be handled with care, avoiding any contact with the pins because
electrostatic discharges may damage the product itself. The same cautions have to be
taken for the SIM, checking carefully the instruction for its use. Do not insert or remove the
SIM when the product is in power saving mode.
The system integrator is responsible for the functioning of the final product; therefore,
care has to be taken to the external components of the module, as well as of any project or
installation issue, because the risk of disturbing the GSM network or external devices or
having an impact on security. Should there be any doubt, please refer to the technical
documentation and the current regulations in force.
Every module has to be equipped with a proper antenna with the correct specifications.
The antenna has to be installed with care, in order to avoid any interference with other
electronic devices, and has to maintain a minimum distance from people (20 cm). In case
this requirement cannot be satisfied, the system integrator has to assess the final product
against the SAR regulations.
29
READ CAREFULLY