Special Instructions; Technical Data - Clearaudio Weight Watcher touch User Manual

User manual / Bedienungsanleitung

5. Special instructions

5.1 Auto-Off
If the device is not used for more than 3 minutes, it automatically switches
off to save the battery.
5.2 Overload indicator
If the capacity is exceeded, the display shows 'O-LD'. Immediately remove
the load and check the functionality of the
the enclosed calibration weight. Bear in mind that you can permanently
Weight Watcher touch
damage the
to overload.

6. Technical data

Measuring accuracy:
Measuring range:
Units:
Power source:
Auto-Off:
Weight:
Dimensions (BxTxH):
Warranty:
Clearaudio electronic is not responsible for typographical errors in descriptions.
Technical specifications subject to change or improvement without prior notice.
Product availability is as long as stock lasts.
Copies and reprints of this documents, including extracts, require written consent from
Clearaudio electronic GmbH; Germany
Made in Germany
Weight Watcher touch
and your warranty claim will expire due
+/- 0.01g
0 - 100g
g, oz, ct, gn
2x CR2032 Batterien
after 3 minutes
approx. 64g
89 x 75.5 x 13.5mm
3.50 x 2.97 x 0.53 inches
2 years
(except batteries)
with
Page / Seite 7