Download Print this page

Cablematic Ripley SDT Series Manual page 2

Single drop trimmer

Advertisement

3. While continuing to hold the cable, as close to the tool as possible, with your left hand, slowly rotate the
tool in a forward direction around the cable. This may be simplified by using the "finger loop" on the end of
the tool. Rotate the tool 3-5 revolutions until you can no longer hear any braid or shielding being cut and/or
the tool spins freely on the cable (7 and 11 cables may require more revolutions). On series 11 cable it may
be necessary to set the blade before rotating the tool. This is accomplished by rotating the tool one time while
squeezing the jaws. Once this is done the tool will guide itself around the cable.
4. With your right hand, firmly grasp the blade cassette area of the tool and pull the tool away from the cable
end. Preparation is now complete.
5. Open the tool and discard any remaining jacket or dielectric waste material.
6. Check the trimmed cable end to ensure that the braid, dielectric and jacket are cut cleanly and that the
center conductor is clean.
Single Drop Trimmer (SDT) Ordering Guide
For .250 (1/4") [6.4mm] Braid Exposure
Model
Drop Cable Series
SDT596-250
59, 6, Std. Tri & Quad
SDT7-250
7 Std. Tri & Quad
SDT11-250*
11 Std Tri & Quad
SDT COAX 9-250
*SDT model supplied with 11 (black) cassette for use on 11 standard and Tri Shield cable and 11Q
(gray) cassette for use on 11 Quad
For .125 (1/8") [3.2mm] Braid Exposure
Model
Drop Cable Series
SDT596-125
59, 6, Std. Tri & Quad
SDT7-125
7 Std. Tri & Quad
SDT11-125**
11 Std Tri & Quad
**SDT model supplied with 11 (yellow) cassette for use on 11 standard and Tri Shield cable and 11Q
(orange) cassette for use on 11 Quad
Note: Replacement Blade Cassettes (2 cassettes per package)
Warranty: RIPLEY warrants its products against defective materials and workmanship for a period of one year
from date of shipment from the RIPLEY factory provided the product is utilized in accordance with instructions
and specified ratings.
Euro Coax 9
46 Nooks Hill Road
Cromwell, CT 06416
Phone: 800-528-8665
Int'l: (01) 860-635-2200
Fax: (01) 860-635-3631
E-mail: info@ripley-tools.com
Internet: www.ripley-tools.com
Replacement Cassettes
RC596-250
RC7-250
RC11-250
RC11Q-250
RC9 -250
Replacement Cassettes
RC596-125
RC7-125
RC11-125
RC11Q-125
Color
Red
Green
Black
Gray
Green
Color
Blue
Tan
Yellow
Orange
36707
rev3
12-01-12 ff

Advertisement

loading

This manual is also suitable for:

Sdt596-250Sdt-250Sdt-coax 9-250Sdt11-250Sdt-125Sdt7-12 ... Show all