Axio MET AX-B2120CW Manual

PIPE INSPECTION CAMERA SYSTEM AX-B2120CW/AX-
B2120RD/AX-2120ST/AX-B2135CW/AX-B2135ST
1. Warning
Read these instructions completely before operating this system.
Please charge the battery first before use.
- To Avoid electrical shock put the item indoor when Charging
- Use Input 110~240V AC Output DC 12.6V, 1000mA Charger ONLY. Charge the battery first before
use!
- Item contains battery, dispose according local legal requirements properly
Read this manual carefully before operating this system
Avoid using the device in extreme humidity or temperatures as this may cause damage to the device
Do not drop or press on the system as this may cause damage to the device
The warranty becomes void if any physical damage is present or if the system is disassembled by the user
Do not disconnect the SD card while recording or playing as this may damage the system and/or the SD
card
Remember to always back up the data on your SD card
2. Safety and Notice
2.1. For your safety
1. Do not attempt to insert, use, or charge a battery not designed for this inspection system.
2. Use the power supply only on even surfaces, without any cover. Open air and circulation around the
product must be available. The maximum ambient temperature is 50 ºC.
3. Risk of explosion may occur if an incorrect battery type is inserted or used. Dispose of used batteries
according to their instructions.
4. Keep the inspection system and its accessories out of the reach of babies, toddlers, and children. In
particular, small parts such as memory cards and battery could be easily dismantled and swallowed.
5. Use only the original accessories to avoid possible risks to health and property, and thus meet all related
legal regulations.
6. When using the LED lights, do not use to close to human or animal eyes (particularly for babies, toddlers,
and children) to avoid injury.
7. In very rare occasions, Li-ion Batteries such as the one provided with this inspection system could