Advertisement
Installation Steps
SUSPENDED MOUNTING
·
Insert wires through the provided hook and screw the hook to the driver housing (Figure 1). Tighten the provided screw to secure the hook (Figure 2).
·
Hang the fixture to customer supplied chain or mounting hardware (Figure 3).
·
Tighten hook's screw to secure the installation (Figure 4).
·
Make appropriate electrical connections.
Figure 1
SURFACE MOUNTED WITH MOUNTING BRACKET
·
Locate (2) Bracket B and attach to the designated locations on the fixture housing with provided screws (Figure 1).
·
Locate (1) Bracket A and attach to secured Bracket B, on both sides, with nylon and steel gaskets, screws and nuts (Figure 2).
·
Adjust the angle of Bracket A to the desired position and sure the position with locking screw, steel gasket and nut on both sides (Figure 3).
·
Attach the bracket to the ceiling or wall.
·
Make appropriate electrical connections.
Screws
Bracket B
Figure 1
Part Number
RB3-13L-U-40
RB3-13L-U-50
RB3-19L-U-40
RB3-19L-U-50
RB3-25L-U-40
RB3-25L-U-50
RB3-31L-U-40
RB3-31L-U-50
TURN OFF POWER FROM MAIN CIRCUIT BREAKER
Screw Hole
Screw
Figure 2
Bracket A
Figure 3
Power
Working Current
100W
100W
150W
150W
200W
200W
240W
240W
LED ROUND HIGH BAY
INSTALLATION INSTRUCTIONS
Figure 3
Bracket A
Bracket B
Figure 2
Stainless Steel Gasket
Nut
Input Voltage
1100mA
1100mA
1650mA
1650mA
AC100-277V
2200mA
2200mA
2640mA
2640mA
Figure 4
Bracket A
Nylon Gasket
Nylon Gasket
Stainless Steel Gasket
Nut
Stainless Steel Gasket
Bracket B
Screw
Efficacy
130lm/w
Screw
Screws
Advertisement
