Carbine CFB-HB Instructions

C F B - H B F L I P B O L T M O R T I C E L O C K - H O L D B A C K M O D E L
1

1. MORTICE LOCK BOLT SELECTION - Bolts are sold separately

CFB-141A - Taper Bolt SS
Hinged Metal Hollow Style Door
Hinged Timber Door
(22mm bolt projection when installed)

2. ASSEMBLY OF FLIP BOLT INTO MORTICE LOCK

2A Remove transport tape
off the lock.
Special Notes:
For installation together with CLS-FAB - Flip Bolt Latching Strike, please refer to installation instructions provided with CLS-FAB.
For installation together with CFB-OES - Oval Escape Turn, please refer to installation instructions provided with CFB-OES.
For installation together with CFB-OTS - Oval Turn Snib, please refer to installation instructions provided with CFB-OTS.
For installation together with CFB-OCEP - Oval Cylinder Rectangular Escutcheon, please refer to installation instructions provided with CFB-OCEP.
LOCK & KEY Phone:
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY LTD ABN 95 003 562 598
This product has been manufactured in Taiwan
to Lock and Key Company specifications
T h e N e x t G e n e r a t i o n
INSTALLATION INTO METAL HOLLOW STYLE DOORS
CFB-HB - Flip Bolt Mortice Lock - Hold Back Model
Provides the feature of hold back when installed with
CFB-CSL - Flip Bolt Mortice Lock - Concealed Short Lever.
2
3
Select bolt appropriate for application.
CFB-142A - Hook Bolt Short SS
Sliding Metal Hollow Style Door
(28mm bolt projection when installed)
*If necessary, insert bolt packers
Bolt Packers (if required)
Only for CFB-141A - Taper Bolt SS
CFB-142A - Hook Bolt Short SS
1300 652 692 Web: www.locknkey.com.au
This product is guaranteed to be free from defects in materials and
workmanship for a period of one (1) year from the date of original
purchase. This warranty is for replacement of product only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this product or its use. This warranty
i n
4 5 6
Sliding Timber Door
2B Insert chosen flip bolt
(sold separately) into lock.
into lock prior to flip bolt.
Web: www. daveweb.com.au
does not cover damage that results from faulty installation or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
L o c k i n g
Item No. Description
1 Main Lock
2 Cover Plate
3 M4 x 16 CSK Screw
4 M4 x 6 CSK Screw
5 Retainer Pin
6 Bolt Packer
CFB-143A - Hook Bolt Long SS
Sliding Metal Hollow Style Door
Sliding Timber Door
(35mm bolt projection when installed)
2C Securely tighten the round
bolt in the clockwise direction
using a 4mm allen key.
CFB-HB - Installation Instructions Revision 2 - 14th March 2019
Q TY
1
1
4
3
2
2
WARNING
Please keep contents
away from small children.
Suffocation Hazard.
NOTE
Please dispose of plastic
bags and other packaging
in a thoughtful manner