Summary of Contents for lavina V32-X-400-E
- Page 1 LAVINA V32-X-400-E ® User Manual Tech Support Line: 800-987-8403 | www.superabrasive.com | info@superabrasive.us...
-
Page 2: Warranty And Returns
Superabrasive offers a guarantee on LAVINA® vacuums, covering manufacturing and material defects, for a period of 24 months from the date of purchase, as invoiced by Superabrasive. The following conditions pertain to this warranty: •... -
Page 3: Table Of Contents
8.1. LAVINA® V32-X-400-E general Parts ..........20 2. MAIN COMPONENTS AND CONTROLS ..........5 8.1. LAVINA® V32-X-400-E general Parts ..........21 Label Data ....................6 8.2. LAVINA® V32-X-400-E Vacuum head cover ........22 Customer Service ..................6 8.2. LAVINA® V32-X-400-E Vacuum head cover ........ 23 3.SAFETY PRECAUTIONS ................ -
Page 4: General Information
General Description Lavina® V32-X-400-E dust collector is designed for sucking and separating dry, non-combustible and non- explosion dust. Dust laden air is sucked through at high speed via the suction hose. The air is slowed down by the cyclone and coarse dust particles are separated out, partly by centrifugal force and partly by gravity. -
Page 5: Main Components And Controls
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 2. MAIN COMPONENTS AND CONTROLS 1) Trolley frame 2) Caster locking wheel 3) LONGOPAC® waste system 4) Caster wheel 5) Main vacuum hose Cam Lock inlet 6) Filter chamber 7) Suction pipe coupling point... -
Page 6: Label Data
Owner’s Manual Original Language – Lavina ® Superabrasive V32-X-400-E 05/2018 LABEL DATA The data on the label provides the correct voltage, wattage, weight (needed for transportation purposes); production year and serial number (needed for maintenance purposes). CUSTOMER SERVICE For customer assistance and technical support call your local distributor or call Superabrasive Inc. at 1-800-987-8403 or visit us at www.superabrasive.com... -
Page 7: Safety Precautions
OPERATING THE VACUUM When operating the • For collecting non-suitable materials (asbestos or LAVINA® V32X, be sure that no one else is within other toxic materials) close proximity to the vacuum. Never leave the • In environments which (1) Possess the risk of vacuum unattended while working. - Page 8 ® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 such operation. When grinding epoxy, first ensure that the epoxy is non-toxic. • Do not vacuum any corrosive substances unless the vacuum is specifically outfitted with containers suitable for this purpose.
-
Page 9: Unpacking, Handling, Transportation And Storage
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 4. UNPACKING, HANDLING, TRANSPORTATION AND STORAGE When unpacking the machine, please check that the following accessories are included: The hose end fitting Wand Floor nozzle Main vacuum hose with Cam Lock to connect to the machine Accessory vacuum hose with Cam Lock to connect to the wand If any of the above-mentioned parts are missing, please contact your local distributor or our sales representative. -
Page 10: Filter Cleaning
Superabrasive V32-X-400-E 06/2019 5.2 FILTER CLEANING LAVINA® V32-X-400-E dust collector has an automatic filter cleaning cycle system with adjustable filter cleaning interval. The main filter cleaning is done by the jet pulse. The operator can set the time interval for the filter cleaning with the FILTER CLEANING INTERVAL potentiometer. -
Page 11: Main Filter Change
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 5.3 MAIN FILTER CHANGE WARNING: Turn off and wait for the fan impeller to completely stop before opening the machine to change filters. IMPORTANT: All of the following procedures must be performed with the dust collector turned off /see chapter 5/. -
Page 12: Longopac® Bag Replacement (Changing Bags)
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 Figure 5.6 Figure 5.7 5.5 LONGOPAC® BAG REPLACEMENT (CHANGING BAGS) V32X has a Longopac system for effective dust storage.This is a 20 m long plastic tube that will be divided into plastic bags using the zip ties attached to the machine. -
Page 13: Installing Longopac® Refill Packs
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 5.6 INSTALLING LONGOPAC® REFILL PACKS When the plastic bag cartridge has reached the end, the plastic bag refill may be installed using the following procedures: • Locate the 2 retaining levers located underneath the Longopac® bag support ring (Fig5.10). - Page 14 ® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 ATTENTION! Wait until turbine impeller has completely stopped before starting servicing the machine. Before moving the dust collector from the working area, the machine must be cleaned. ...
-
Page 15: Lavina®V32-X-400-Е Electrical System
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 LAVINA®V32-X-400-Е ELECTRICAL SYSTEM... - Page 16 ® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019...
-
Page 17: Automatic Filter Cleaning System Inspection
06/2019 6.1 AUTOMATIC FILTER CLEANING SYSTEM INSPECTION Dust collector LAVINA® V32-X-400-E has automatic filter cleaning system. There are two driving actuators, one for the inlet valve and second for the valve of the suction head. 6.1.1 REPLACING THE ACTUATOR OF THE VALVE OF THE SUCTION HEAD Figure 6.2... -
Page 18: Index Of Problems And Solutions
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 INDEX OF PROBLEMS AND SOLUTIONS VACUUM ISSUE OR POSSIBLE CAUSE CORRECTIVE ACTION SYMPTOM NO POWER MOTOR DOES NOT CONNECT THE MACHINE START SWITCH DEFECTIVE REPLACE WRONG PHASE SEQUENCE OPEN THE CONTROL BOX AND CHECK MOTOR DOES NOT LOGO FOR MESSAGES . -
Page 19: Important
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 CLEANING BUTTON BLINKS ABNORMAL NOISE ORDER SERVICE IMPORTANT: To check the LOGO messages press the up arrow button to light the screen. After the corrective action, press the STOP button to clear the LGO message. -
Page 20: Spare Parts
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8. SPARE PARTS 8.1. LAVINA® V32-X-400-E GENERAL PARTS... -
Page 21: Lavina® V32-X-400-E General Parts
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.1. LAVINA® V32-X-400-E GENERAL PARTS Item No. Description Pcs. Item No. Description Pcs. Wheel Аxle V32X-20.00.00 Frame V25X-20.00.02 Vacuum head cover V32GX-30.00.00 IFP250X50-25X60 Wheel Assembly M8x30DIN912 Screw V32X-00.00.02 Rear cover... -
Page 22: Lavina® V32-X-400-E Vacuum Head Cover
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.2. LAVINA® V32-X-400-E VACUUM HEAD COVER... -
Page 23: Lavina® V32-X-400-E
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.2. LAVINA® V32-X-400-E VACUUM HEAD COVER Item No. Description Pcs. V32GX-30.00.04 Top cover М6X10ISO7380F Screw V32GX-30.00.03 Fixing Plate Handle for Emergency V32GX-33.00.00 Filter Cleaning M8DIN985 V32GX-30.00.06 Distance Bushing CAHB10A2A Actuator... -
Page 24: Lavina® V32-X-400-E Filter Chamber
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.3. LAVINA® V32-X-400-E FILTER CHAMBER 8.3. LAVINA®V32-X-400-E FILTER CHAMBER Item No. Description Pcs. Item No. Description Pcs. V32GX-10.10.00 Tank M8X20DIN933 Bolt V25X-12.00.00 Closing Flap M5X12DIN933 Bolt V25X-16.00.00 Retaining levers TLL.Z-24_125 latches V32GX-10.00.03... -
Page 25: Lavina®V32-X-400-Е Power Unit
SC40B-860T Vac Turbine-V32X-480 11.3 SC40B-750T-IE3 Vac Turbine-V32X-400-E Buffer D30H20M8x20 M8DIN9021 Washer M8DIN985 8.5. LAVINA® V32-X-400-E HEPA FILTER BOX 8.5. LAVINA® V32-X-400-E HEPA FILTER BOX Item No. Description Pcs. Hepa Filter Box Base V32GX-51.00.00 Assembly V32GX-51.10.00 Hepa Filter Box Base 111.16-C... -
Page 26: Lavina®V32-X-400-E Inlet Valve
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.6. LAVINA® V32-X-400-E INLET VALVE 8.6. LAVINA®V32-X-400-E INLET VALVE Item No. Description Pcs. Item No. Description Pcs. V32GX-14.00.07 Guard D6x22DIN1481 Spring Pin V32GX-14.10.00 Serving Handle Assembly M6DIN985 E03780 Hairpin Cotter... -
Page 27: Lavina® V32-X-400-Е Control Box Parts
® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.8. LAVINA® V32-X-400-E CONTROL BOX PARTS 8.8 LAVINA® V32-X-400-Е CONTROL BOX PARTS Item No. Description Pcs. L20NXE-30.11.03 Contactor Flare Control V32X-90.00.02 Relay V32X-90.00.03 PTC Motor Control V32X-90.00.04 LOGO V32GX-90.20.04 Current stabilizer V32X-90.00.06... - Page 28 ® Owner’s Manual Original Language – Lavina Superabrasive V32-X-400-E 06/2019 8.9. LAVINA® V32GX INCLUDED PARTS Figure 8.11-2 Figure 8.11-1 Figure 8.11-4 Figure 8.11-3 8.11. LAVINA® V32GX INCLUDED PARTS Item No. Description L-FB-50 Floor Brush combo 18 in L-A-50 Steel wand Аccessory vacuum hose with...
-
Page 29: Disposal
11. CE-CERTIFICATION All LAVINA® dust collectors are designed to operate correctly in an electromagnetic atmosphere of industrial type, and are equipped with all of the mechanical and electrical safety protections in conformity with the following European CEE rules and regulations: LAVINA®...
Need help?
Do you have a question about the V32-X-400-E and is the answer not in the manual?
Questions and answers