Advertisement
Quick Links
COLOUR SHOW 800
RGB laser with 20K fast scanning motor
M
A
N
U
A
680mW RGB laser with pre-programmed fast scanning RGB moving effects
300mW blue laser @450nm / 80mW green laser @532nm / 300mW red laser @650nm
PC IDLA input and output / 12 channel DMX512 operation
AC 110V-240V, 50/60Hz input power / Rated power: 40w
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
L
V
E
R
26 / 07 / 10
Scanner system: 20K high speed optical scanner
Pre-programmed moving patterns in Auto mode
Sound-to-Light, Auto and DMX modes
Linkable Master/Slave mode
3 pin XLR DMX connection
Key operated safety control / Safety mounting point
Adjustable hanging bracket / Tough metal chassis
Dimensions: 345 x 100 x 230mm
© Copyright Lamba plc 2010. E&OE.
S
I
O
N
3
.
0
Advertisement
Summary of Contents for Kam Lighting COLOUR SHOW 800
- Page 1 COLOUR SHOW 800 RGB laser with 20K fast scanning motor 26 / 07 / 10 680mW RGB laser with pre-programmed fast scanning RGB moving effects 300mW blue laser @450nm / 80mW green laser @532nm / 300mW red laser @650nm Scanner system: 20K high speed optical scanner...
- Page 2 Thank you for purchasing this product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, please retain them for future reference. This unit has been tested at the factory before being shipped to you.
- Page 3 Front and Rear panel view 1. Laser Aperture 2. Sound active microphone 3. Sound active indicator: Blue 4. Power indicator: Red 1. Power Jack 2. ON/OFF switch 3. Key lock 4. DMX or linking jack 5. Sound sensitivity knob 6.Pattern Size knob 7.
- Page 4 Master unit: When dipswitch 1 is set to ON, all the units will run with the auto program. Master unit: When dipswitches 1 and 2 are set to ON, all the units run with auto animation. Important note: 1. Link no more than 5 units together at one time. 2.
-
Page 5: Troubleshooting
0~85 Auto zooming (+) Zooming 86~170 Auto zooming (-) 171~255 Manual zooming (+/-) CH10 Pattern Size 0~255 0 is Moderate, 1 is smallest, 255 is biggest CH11 Display dot 0~255 0 is display dot, 255 is best brightness 0~127 Auto drawing mode 1 (under dynamic pattern) CH12 Drawing 128~255...