KISANKRAFT KK-PP2-8627 Operation Manual

Pole primer/ palm harvester

Advertisement

Quick Links

Pole Pruner/
Product
Palm Harvester
KisanKraft
Brand
 KK-PP2-8627
Model
 KK-PH2-215
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
Warranty Certificate
(D
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER
Dealer's Invoice
No.
Dealer's Stamp (
Dealer's Sign
: info@kisankraft.com
C
)
EALER
OPY
TM
TM
.
Address, Phone, TIN, etc.):
: +91.80.22178200
Page 1 of 56

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-PP2-8627 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KISANKRAFT KK-PP2-8627

  • Page 1 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 2 Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 3 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Operation Manual KK-PP2-8627 KK-PH2-215 KisanKraft Machine Tools Pvt. Ltd. Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA ♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦...
  • Page 4: Table Of Contents

    Maintaining and Sharpening the Saw Chain ..........28 Inspections and Maintenance ..............31 Troubleshooting ..................32 Technical Specifications ................33 Engine Parts Diagram & List-KK-PP2-8627 ..........34 Body Parts Diagram & List-KK-PP2-8627 ..........36 2 Stroke Gasoline Engine- Manual ............. 41 : www.kisankraft.com : info@kisankraft.com...
  • Page 5 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 6 Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 7: Before Getting Started

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Before Getting Started Before using the machine please read this operator's manual carefully, operate the machine correctly and engage in your task with safely. Please preserve this manual properly so that it can provide you with information whenever necessary.
  • Page 8: Safety Instructions

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 gloves Wear non-slip, heavy-duty gloves. Wear non-slip safety footwear when using this boots equipment. Keep all bystanders at least 15m (50 ft.) away. Keep Keep bystanders the machine a sufficient distance away from electrical away power lines.
  • Page 9 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 can immediately stop the device in case of an emergency. Using this machine against the instructions given may result in serious injury. Wear proper protective suit:  Put on protection goggles and hearing protection devices and safety helmet.
  • Page 10 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 22. Do not use the unit when you are tired, ill or under the influence of medication, drugs or alcohol. 23. FOLLOW INSTRUCTION FOR CHANGING ACCESSORIES.  Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters, heaters, furnaces, etc.
  • Page 11 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 37. Make periodic inspections to assure safe and efficient operation. For a thorough inspection of your machine, please contact a dealer. 38. Keep the machine away from fire or spark. 39. It is believed that a condition called Raynaud's phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold.
  • Page 12 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 46. Danger! Your power tool is not insulated against electric shock. To reduce the risk of electrocution, never operate this power tool in the vicinity of any wires or cables (power, etc.) which may be carrying electric current.
  • Page 13 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 To Avoid Pull-in:1. Be alert to forces or situations that may cause material to pinch the chain at the bottom of the bar.2. Always start a cut with the chain rotating at full speed.
  • Page 14: Main Parts

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Main Parts Handle Hose 15. Oil Tank Fixed Drive Tube 16. Oil Filler Cap Carrying Ring 17. Telescopic Drive Tube (Shaft) Slide Control 18. Clamp Screw Throttle Trigger 19. Chain Sprocket Cover Lockout 20. Hook Throttle Trigger 21.
  • Page 15 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Never stand directly underneath the branch you are cutting – be wary of falling branches. Note that a branch may spring back at you after it hits the ground – risk of injury. Disposal: Do not throw cuttings into the garbage can –...
  • Page 16: Mounting The Bar And Chain

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Cutting above obstacles: The unit's long reach makes it possible to prune branches that are overhanging obstacles, such as rivers or lakes. The tool angle in this case depends on the position of the branch.
  • Page 17: Adjusting The Throttle Cable

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Tensioning the Chain:  Re-tensioning during cutting work: Stopping the engine  Loosen the nut.   Hold the bar nose up.  Use a screwdriver to turn the tensioning screw (1) clockwise until the chain fits snugly against the underside of the bar.
  • Page 18: Chain Lubricant

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Fuel mixture at the rate other than 40:1 may cause damage to the engine, Ensure mixture ratio is correct. Fuel The engine uses two-stroke fuel, a mixture of gasoline and 2-stroke lubricant 40:1. IMPORTANT Two-stroke fuel may separate.
  • Page 19: Preparing For Operations

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Filling up with chain oil Filling up with chain oil   Take care not to spill chain oil while refilling and do not overfill the tank. Closing the filler cap To close the oil tank, place the filler cap in position with the grip upright, making sure the recesses are in alignment.
  • Page 20 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 WARNING! To quickly detach the pole saw from the shoulder strap, pull the quick-release latch tab upward. Controls Throttle trigger lockout Throttle Slide control Starting Press down the trigger lockout lever and squeeze the throttle trigger.
  • Page 21 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Starting method 2: Remove the chain guard. Position the shaft  on a branch so that it is held by the hook. Hold the unit firmly with your left hand on  the fan housing – your thumb should be under the fan housing.
  • Page 22: Operating Instructions

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Operating Instructions During break-in period: A factory-new machine should not be run at high revs (full throttle off load) for the first three tank fillings. This avoids unnecessary high loads during the break-in period. As all moving parts have to bed in during the break-in period, the frictional resistances in the engine are greater during this period.
  • Page 23: Taking Care Of The Guide

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Taking Care of the Guide Turn the bar over – every time you sharpen  the chain and every time you replace the chain – this helps avoid one-sided wear, especially at the nose and underside of the bar.
  • Page 24 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Adjusting the Carburetor: The carburetor comes from the factory with a standard setting. This setting provides an optimum fuel-air mixture under most operating conditions. With this carburetor it is only possible to adjust the high speed and low speed screws within fine limits. Standard...
  • Page 25 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Erratic idling behavior, engine stops even though setting of LA-screw has been corrected, poor acceleration. Idle setting is too lean Turn the low speed screw (L) counterclockwise, no further than stop, until the ...
  • Page 26 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Checking the Spark Plug:  Clean dirty spark plug.  Check electrode gap (A) and readjust if necessary – see “Specifications". Use only resistor type spark plugs of the  approved range. Rectify problems which have caused fouling of spark plug: –...
  • Page 27: Storage And Transportation

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Use a screwdriver or suitable pliers to fit the spring clip (3) on the starter post and over the pawl's peg – the spring clip must point counterclockwise – as shown in the illustration.
  • Page 28: Checking And Replacing The Chain Sprocket

    We recommend the use of original KisanKraft chain sprockets. The chain sprocket is driven via a friction clutch. Have the chain sprocket replaced by a servicing dealer. We recommend that you have servicing and repair work carried out exclusively by an authorized dealer or KisanKraft service center.
  • Page 29 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Cutter shapes: Micro = Semi-chisel The specified angles A and B are obtained automatically if the recommended files or sharpening tools and correct settings are used. The angles must be the same on all cutters. If...
  • Page 30 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Depth gauge setting The depth gauge determines the height at which the cutter enters the wood and thus the thickness of the chip removed. (a-Specified distance or setting between depth gauge and cutting edge.)This setting may be increased by 0.2 mm (0.008 in.) for cutting softwood in the mild weather...
  • Page 31: Inspections And Maintenance

    Inspections and Maintenance Fuel pickup body in tank: Have the pickup body in the fuel tank replaced every year. Kisankraft recommends that you have servicing and repair work carried out exclusively by our servicing centers. Maintenance and Care: : www.kisankraft.com : info@kisankraft.com...
  • Page 32: Troubleshooting

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 NOTE: Daily maintenance, including the checking for loose fasteners, fuel leaks and damaged parts (e.g. cracks in the saw blade). Troubleshooting Problem Probable cause Action to be taken Note specification about start Start sequence error...
  • Page 33: Technical Specifications

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Problem Probable cause Action to be taken Carburetor mixed fuel Adjust carburetor by authorized adjustment error service personnel Too much exhaust gas/fuel dust Use 2-stroke mixed fuel in 40:1 Fuel mix error mixture ratio...
  • Page 34: Engine Parts Diagram & List-Kk-Pp2-8627

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Engine Parts Diagram & List-KK-PP2-8627 : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 34 of 56...
  • Page 35 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Part No Part Name Part No Part Name E-01 Screw(Air Filter) E-39 Ball Bearing 6001/P6 E-02 Air Cleaner Outside Cover E-40 Gasket Crank Case E-03 Air Cleaner Sponge E-41 Crank Case (Big) E-04 Baffle (Big)
  • Page 36: Body Parts Diagram & List-Kk-Pp2-8627

    Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Body Parts Diagram & List-KK-PP2-8627 Part No Part Name Part No Part Name BA-22 Box cover (Gear Case) BA-01 Screw M 6x25 (Allen) BA-23 Oil Pipe BA-02 Cover Board Comp BA-24 Oil Filter BA-03...
  • Page 37 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Part No Part Name Part No Part Name BA-08 Fixed Block BA-30 Right pinion(Big) BA-09 Gear(Adjust Pin) BA-31 Bearing 627-Z BA-10 Screw M6X30(ALLEN) BA-32 Grease Nipple / Oil Cup BA-11 BOLT M5Xl4 (Star) BA-33...
  • Page 38 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Part No Part Name Part No Part Name Connecting Sleeve Assy BC-02 Handle(Connecting Sleeve) BC-01 BC-03 Screw M5X20 (Allen) Part. Part Name Part. No Part Name BD-07 Screw ST2. 9 X 6. 5 BD-01...
  • Page 39 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Part. Part Name Part. No Part Name Lever Assy BE-10 BE-01 Clamp BE-11 BE-02 BE-12 BE-03 BE-13 Stop Switch BE-04 Spring(Tine) BE-14 BE-05 Spring(Safety Lever) BE-15 BE-06 Spring(Throttle Lever) BE-16 BE-07 BE-17 Rubber Cover(Thin Pipe)
  • Page 40 Pole Pruner/ Palm Harvester KK-PP2-8627/ KK-PH2-215 Part. No Part Name Part. No Part Name Clutch Comp. BH-06 Rubber Cover(Linker) BH-01 Clutch Drum BH-07 Screw M5X12 (Allen) BH-02 Stop Ring 35 (Inner) BH-08 Screw M5X25 (Allen) BH-03 Bearing 6202-2RZ/PE BH-09 Clamp A...
  • Page 41: Stroke Gasoline Engine- Manual

    Do not operate the engine with the muffler or air cleaner cover removed. (Inspect particularly the muffler at regular intervals for loose mounting screws, breakage or leakage, and repair or replace it if any abnormality is observed.) : www.kisankraft.com : info@kisankraft.com : +91.80.22178200...
  • Page 42 Although sufficient care has been taken to assure the safety of the engine, operators or service personnel must observe necessary precautions to operate it safely and protect themselves from possible dangers. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 42 of 56...
  • Page 43  Driven equipment may fail to stop even if the throttle lever is returned. Throttle wire adjust screw Lock nut Play (As much as the external wire can move lightly) : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 43 of 56...
  • Page 44 CAUTION Cracks, fissures or disconnection from joints could cause fire or explosion by leaked fuel. Service or replace damaged fuel pipe and grommet. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 44 of 56...
  • Page 45 (at the If only exploding sounds are heard, but it does not start, return the choke lever to the fully closed position and pull the starter grip vigorously once again. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 45 of 56...
  • Page 46 When the engine fails to start after trying recoil operation for 7 to 8 times. Return the starter lever to the operating position and try the recoil operation. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 46 of 56...
  • Page 47 If the decompression slot of cylinder is clogged, the engine may start slower than normal. Clean the slot to restore the normal condition. STOP Set the throttle lever at the slow speed position. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 47 of 56...
  • Page 48 Do not operate the engine at the indoor or a place with poor ventilation. (Exhaust  gas contains odorless and harmful carbon monoxide.)  Do not insert in or approach hands or foot at the moving or rotating sections. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 48 of 56...
  • Page 49 (right turn). Right turns: Increase the  thickness of fuel. Left turns: Decrease the  thickness of fuel. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 49 of 56...
  • Page 50 When it is necessary to adjust, consult your dealer. Do not decrease the thickness of fuel too much. (It could result in the seizure trouble of engine.) High speed fuel adjusting screw : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 50 of 56...
  • Page 51 After removing carbon accumulated on the electrodes and the insulator, adjust the clearance between the electrodes at 0.6 ~ 0.7 mm When mounting the plug cap, push it in securely : www.kisankraft.com : info@kisankraft.com : +91.80.22178200 Page 51 of 56...
  • Page 52 Make sure to drain the fuel when storing the unit for a long period of time. Sufficient care must be taken not to use fires at the vicinity when handling the fuel. : www.kisankraft.com : info@kisankraft.com : +91.80.22178200...
  • Page 53 KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel Backpack Brush Cutter Sprayers and Accessories Tea Pruner...
  • Page 54 Wide Range of Products for Every Need MISSED CALL: 07676065555 For more information give Many of our products have BIS: ISI certification. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 54 of 56...
  • Page 55 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 56 Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer.

This manual is also suitable for:

Kk-ph2-215

Table of Contents