Advertisement
Quick Links
© 2015 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, SuperLoader,
Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates
in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum
specifications are subject to change.
6-68446-01, April 2016
Quantum DXi6802 and
DXi690x: Rack Mount Rails
Follow the steps in this document to replace the rack mount rails in the DXi6802
or DXi690x:
1
Shutting Down the System
2 Replacing the rack mount rails:
•
Replacing the DXi6802 or DXi690x Node Rails
•
Replacing the DXi6802 Array or Expansion Module Rails
•
Replacing the DXi690x Array or Expansion Module Rails
3
Turning On the System
Necessary Tools
Before you begin, gather the necessary tools:
• Small flat head screwdriver
• Large flat head screwdriver
• #2 PHILLIPS screwdriver
Caution: Use appropriate ESD precautions, including the use of a grounding
strap, when performing any of these procedures.
Replacement
on page 2
on page 17
on page 3:
on page 8
on page 12
*6-68446-01*
Advertisement
Related Manuals for Quantum DXi690 Series
Summary of Contents for Quantum DXi690 Series
- Page 1 © 2015 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, SuperLoader, Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum specifications are subject to change.
-
Page 2: Shutting Down The System
Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Shutting Down the System To shut down the system: Caution: Before shutting down the DXi6802 or DXi690x, make sure that all backup and replication jobs are finished, and that space reclamation activity is complete. - Page 3 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Replacing the DXi6802 or DXi690x Node Rails Follow the steps below to replace the DXi6802 or DXi690x Node rails: Removing the DXi6802 or DXi690x Node from the Rack on page 3...
- Page 4 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 3 Removing the Node from the Rack Rear rail standoffs Rear rail J-slots Slide-release lock button Locking tab Inner slide rails Lock lever Locking tab 6 Slide the Node forward until the rail standoffs are at the front of the J-slots.
- Page 5 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 4 Removing the Node Rails Latch release button Installing the DXi6802 To install the replacement DXi6802 or DXi690x Node rack mounting rails: or DXi690x Node Rack 1 If present, remove the orange plastic clip from each mounting rail so that Mounting Rails the rail can be extended.
- Page 6 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 5 Installing the Node Rails Latches click into place in rack flange (round or square holes) Rail front end Rail back end Latch release button 3 Align each back end piece in the bottom and top holes of the desired U spaces.
- Page 7 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 6 Installing the Node Rear rail standoffs Rear rail J-slots Slide-release lock button Locking tab Inner slide rails Lock lever Locking tab 2 Locate the rear rail standoff on each side of the system and lower them into the rear J-slots on the slide assemblies.
- Page 8 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Replacing the DXi6802 Array or Expansion Module Rails Follow the steps below to replace the DXi6802 Array or Expansion Module rails: Removing the DXi6802 Array or Expansion Module from the Rack...
- Page 9 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 8 Removing the Array or Expansion Module Rails Rack mounting holes Adjustment screws Mounting rail Remove the bottom front screw BEFORE sliding out the module 5 Slide the Array or Expansion Module out of the rack and place it on a level surface.
- Page 10 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 2 Make sure that the adjustment screws on the support rail are loose. 3 Place the support rail inside the cabinet and extend the support rail until the flanges on the support rail touch the inside of the cabinet.
- Page 11 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Installing the DXi6802 To install the DXi6802 Array Module or Expansion Module: Array or Expansion 1 Align the Array or Expansion Module with the rails and slide the module into...
- Page 12 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Replacing the DXi690x Array or Expansion Module Rails Note: NetApp Co-Branded EMEA installations do not follow the rack installation procedures below. NetApp Co-Branded EMEA Array and Expansion Module rails follow the same procedures as the DXi6802...
- Page 13 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 11 Removing the Array or Expansion Module Rails Front of Array or Expansion Module 10-32 x 3/4 in. screw 5 Slide the Array or Expansion Module out of the rack and place it on a level surface.
- Page 14 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Figure 12 Removing the Array or Expansion Module Rails Latches click into place in rack flange (round or square holes) Rail front end Rail back end Latch release button...
- Page 15 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Installing the DXi690x To install the replacement DXi690x Array Module or Expansion Module rack Array or Expansion mounting rails: Module Rack Mounting 1 Position the left and right rail end pieces labeled FRONT facing inward, and...
- Page 16 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Installing the DXi690x To install the Array Module or Expansion Module: Array or Expansion 1 Align the Array or Expansion Module with the rails and slide the module into...
-
Page 17: Turning On The System
Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Turning On the System To turn on the DXi6802 or DXi690x system: 1 Turn on both power switches on the back of each Expansion Module (EBOD) (see Figure 15). Wait until the seven segment display on the rear of the module displays 00 (approximately 1 minute). - Page 18 Quantum DXi6802 and DXi690x: Rack Mount Rails Replacement 6-68446-01 April 2016 Turning On the System...
Need help?
Do you have a question about the DXi690 Series and is the answer not in the manual?
Questions and answers