Table of Contents
Advertisement
Safety and Caution
Do not expose the Boost to extreme or rapid changes in temperature or humidity.
Do not place Boost near a radiator or heater, or where it will be exposed to direct sunlight.
These conditions may damage electronics or optics of the Boost.
Handle the Boost with care. Rough handling will damage the internal components.
Do not remove any parts of the Boost. Contact AbleNet to service the Boost if necessary.
Do not open any of the components as this will void the warranty. Each component contains
parts which should only be serviced by an AbleNet repair specialist.
Do not use cleaning agents or abrasive materials as they will damage your unit. Avoid
touching the lens of the camera and keep it clean by using proper cleaning means.
Use only the power adapter provided.
Do not hit, vibrate, squeeze or drop the equipment with violence.
Do not use the unit under +5°C (41F) or above +40°C (104F).
Use of the Boost other than that described in this user manual will exclude it from warranty
conditions.
5
Advertisement
Table of Contents
