Page 1
User’s Manual PIN RFID CABINET LOCK PN-19RF Overview ………………………………………………………………………………………… 2 General Introduction......................2 1. Unlocking Modes...................... 2 Getting Started........................2 1. Unlock and lock using card and password…............3 2. How to Change Password..................3 3. Adding Management Card.……………………………………………………………….4 4. Adding User card.......................4 5.
Page 2
Overview The PN-19 RF works both with a pin as well as RFID card. PN-19RF is compatible with 125 kHz proximity card Model compatible with mifare 13.5 MHz is also available on order. General Introduction Reset Touch Panel Card Inductive Zone USB –...
Page 3
C. Lock and unlock using card and password Use Password to Unlock For the first time input the default factory password “1234+ OK” or input the factory default management password “12345678+OK” You will hear a beep and the green LED flashes.
Page 4
F. Setting the Management card. Input the current management password, Press “C” You will hear a beep and the green light will start to flash. Show the card which you want to add as the management card near the inductive zone. ...
Page 5
You have successfully deleted a user card. You can continue to show other user cards, you wish to delete Other features:- 1. Auto – alarm will be activated when you input the wrong password 4 times and the lock will be dead for 1 min. 2.
Need help?
Do you have a question about the PN-19RF and is the answer not in the manual?
Questions and answers