Summary of Contents for Huger JTR 168 LR H
- Page 1 Long Range Remote Thermometer User Manual Bedienungsanleitung Guide d’utilisation Manual de instrucciones Libretto D’istruzioni Gebruiksaanwijzing...
-
Page 2: Main Features
Deluxe In/Out Remote Thermometer with Trend Chart MODEL: JTR-I68LR USER’S MANUAL Congratulations on your purchase of the JTR- 168LR Deluxe In/ Out Remote Thermometer. The basic package comes with a main unit (the temperature station) and a remote unit (the therm0 sensor). The main unit can support up to three remote units. - Page 4 Selects between degrees Centigrade (“C) and Fahrenheit (“F) CHANNEL SLIDE SWITCH Designates the remote unit Channel 1, Channel 2 or 1. Remove the screws on the battery compartment. Channel 3 CHANNEL 2. Select the channel number on the slide switch. RESET BUTTON 3.
-
Page 5: Getting Started
Once batteries are in place for the remote units, they will start trans- 1. Slide open the battey compartment door. mitting samplings roughly at 30-second intervals. 2. Insert two UM-3 AA-sized batteries. The main unit will also start receiving once batteries are installed. The temperature of the selected channel will be displayed on the top line and the indoor temperature on the bottom line. -
Page 6: Maximum And Minimum Temperatures
If no readings are received from one particular channel for more than two minutes, blanks will be displayed until further readings are successfully searched. Check the remote unit is sound and secure. You can wait for a little while or press [CHANNEL] [MEMORY] simultaneously to enforce an immediate search. -
Page 7: Disconnected Signals
alarm range. To stop the alarm, press any key or change the chan- nel. Display features will continue to flash as a reminder that the temperature remains within the ice warning range. If without obvious reasons the display for a particular channel goes To deactivate the ice warning function, slide the ICE WARNING [CHANNEL]... -
Page 8: The Reset Button
Main Unit Wall Mount,.? Table Stand RESET button is used to enhance synchronization of signals after battery replacement or when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values. This unit is engineered to give you years of satisfactory service if you handle it carefully. -
Page 9: Specifications
Power Main unit : use 2 pcs UM-3 or”AA” Temperature Measurement : use 2 pcs UM-4 or “AAA” Remote unit Main Unit Indoor Temperature measurement Weight : -9.9OC to +70.0°c Displayed IN temperature range : 200 g (without battery) Main unit : 87 g (without battery Remote sensing unit : -5.OOC to +50.0°c... - Page 10 However, there is no grarantee that interference will not occur in a CAUTON particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- further notice. mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following manual may differ from the actual display.
Need help?
Do you have a question about the JTR 168 LR H and is the answer not in the manual?
Questions and answers