Advertisement
Quick Links
QUIck START
We know you are anxious to start
using your Instant Lab, but please
take a moment to read these brief
instructions before you begin.
GETTING READY
1
2
Download and install the free
Slide the film door latch to
Impossible Project App to
open the film door. Push the
your iPhone
®
or iPod Touch
®
.
film cassette all the way in.
Search for 'Impossible
Close the film door.
Project' in the App Store
or
SM
Note Please check film pack
simply scan the QR code to
aging for development time,
the far top right.
handling and storage details.
THE INSTANT LAB
USING THE INSTANT LAB
3
4
Press and hold the eject
Pull the tower up until all
button for 1 second to eject
5 sections of the tower have
the film darkslide.
clicked firmly into place.
Remove the cradle cover
Note Eject the darkslide only
that's protecting the lens.
once each time after inserting
a new film pack.
5
6
Launch the Impossible
When ready, place your iPhone
Project App on your iPhone.
on the cradle with the screen
Choose 'Instant Lab' from
facing down. Once in the cra
the menu and follow the
dle, the iPhone flash will turn
instructions on the screen to
on. Within 3 seconds, pull the
choose and edit your image.
shutter slide all the way out.
Note iPod devices will sound
an alert instead of the flash.
7
8
After the flash goes off,
Press the eject button to
push the shutter slide back
eject your instant photo.
in. Once the shutter slide
Shield your photo from light
is back in, you can safely
during development! See film
remove your iPhone.
packaging for details.
DONE!
9
Remove your iPhone and
replace the cradle cover
to protect the lens. Press tabs
on either side of each tower
section to collapse the tower.
Advertisement
