Download Print this page

Triple S Scepter PE50 Operating & Maintenance Instructions

5 gallon box extractor

Advertisement

Quick Links

INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell all
operators to read the book. If you do not follow the instruc-
tions, you can cause an injury or damage equipment, furni-
ture or buildings.
For new books write to:
Triple S
2 Executive Park Drive
Billerica, MA 01862
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately with
the delivering carrier.
Scepter PE50
5 Gallon
Box Extractor
OPERATING & MAINTENANCE
INSTRUCTIONS
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Triple S
reserves the right to make changes or improvements to its
machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL
SERIAL NUMBER
PART NUMBER
DATE PURCHASED

Advertisement

loading
Need help?

Need help?

Do you have a question about the Scepter PE50 and is the answer not in the manual?

Questions and answers

Summary of Contents for Triple S Scepter PE50

  • Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Triple S and safe operation of this machine. Read this book care- reserves the right to make changes or improvements to its fully before starting the machine.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE! WARNING! To reduce the risk of fire, electric shock, or injury: Unplug from outlet when not in use and before servicing. Do not use outdoors. Protect the machine from rain. 3.
  • Page 3: Assembly And Operation

    OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow of the carpet and pulling dirt embedded in the carpet up the instructions given in this booklet and the training given while the suction created by the vacuum motor picks up by your supervisor.
  • Page 4 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR FINAL ASSEMBLY...
  • Page 5 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR FINAL ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 962010 Screw-1/4-20 x 1 HTB FT W104D Washer-1/4 Flat SAE SS S453P Clamp-Hose 251802 Base-Black 255113 Lid Assembly 256404 Control Plate Assembly 258607 Tank-Recovery-Black 258602...
  • Page 6 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR RECOVERY TANK...
  • Page 7 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR RECOVERY TANK PARTS LIST ITEM PART NO. DESCRIPTION QTY. 258607 Tank-Recovery-Black 920011 Nut-1/4-20 Elastic Stop S400P5 Locknut-1 1/2 920004 Nut-1/4-20 Hex 920665 Nut-1/4 SS Hex Nyloc 920676 Locknut-1 1/2 Serration W311D Washer-1/4 Fender Zinc...
  • Page 8 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR SOLUTION TANK...
  • Page 9 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR SOLUTION TANK PARTS LIST ITEM PART NO. DESCRIPTION QTY. 258602 Tank-Solution-Black S372P Washer-1.5 OD x 0.6875 Nylon 202050 Clamp-Solution Hose 211310 Body-90 Jet w/Locknut S626P Strainer-3/8 NPT 214111 Hose-3/8 x 18"...
  • Page 10 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR BASE ASSEMBLY 15 16...
  • Page 11 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR BASE ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 908059 Cord Asm-25' 16-SJT 251802 Base-Black 920011 Nut-1/4-20 Elastic Stop 920680 Locknut-3/8 Zinc 920666 Nut-10-32 Hex SS Nyloc 962113 Screw-10-24 x 1.25 SS PHP 962010...
  • Page 12 SSS SCEPTER 5-GALLON BOX EXTRACTOR CONTROL PLATE ASSEMBLY...
  • Page 13 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR CONTROL PLATE ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 908115 Cord-Control 16/5-54" 962015 Screw-10-32 x 3/8 PHP S948P Terminal-Female 911543 Terminal-Yellow Fem DICS 256401 Switch Plate 911089 Switch-Rocker 20 Amp 251344 Wire-14 Gauge 6"...
  • Page 14 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR PUMP ASSEMBLY SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR PUMP ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 3765 Elbow-Male 3/8 to 3/8 257002 Pump-60 PSI...
  • Page 15 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR VACUUM MOTOR ASSEMBLY SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR VACUUM MOTOR ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 962211 Screw-10 x 3/8 Hex Washer 962119 Screw-8 x 1/2 HH Tek-Zinc 252812 Elbow-Short 90D PVC...
  • Page 16 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR HOSE ASSEMBLY...
  • Page 17 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR HOSE ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 252403 Cuff-Hose 1.5 x 1.5" 254105 Hose-Vacuum 1.5" (Per Foot, No Cuffs) 12 ft 254138 Hose-Vacuum Assm 12' w/Cuffs S250P Hose-Solution 3/8" (Per Foot) 12 ft 203359 Fitting-Hose Barb 3/8"...
  • Page 18 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR WAND ASSEMBLY...
  • Page 19 SSS SCEPTER PE50 5-GALLON BOX EXTRACTOR WAND ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. 203302 Quick Disconnect-Male 1/4 252809 Elbow-1/4 to 1/4 259402 Valve-120 PSI Plastic Black 255703 Nipple-1/4 Male Threaded 254903 Spray Jet 1/8" Brass 259801 1-Jet Wand Assembly-Complete...
  • Page 20 The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Triple S at the address listed herein for the location of the nearest Triple S repair center or agent or for other instructions pertaining to your warranty difficulty.