KISANKRAFT KK-BC2-JP30 Operation Manual

Hide thumbs Also See for KK-BC2-JP30:

Advertisement

Quick Links

Brush Cutter
Product
KisanKraft
Brand
 KK-BC2-JP30
Model
 KK-BC2-JP45
 KK-TC2-JP45
W
ARRANTY
6
MONTHS
P
ERIOD
Dealer's
Invoice Date
Buyer's Info (
Name, Address, Phone, etc.):
Buyer's Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer's stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
Warranty Certificate
(D
KisanKraft
Invoice Date
KisanKraft
Invoice No.
F
OR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER
Dealer's Invoice
No.
Dealer's Stamp (
Dealer's Sign
: info@kisankraft.com
C
)
EALER
OPY
TM
TM
.
Address, Phone, TIN, etc.):
: +91.80. 22178200
Page 1 of 68

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KK-BC2-JP30 and is the answer not in the manual?

Questions and answers

Summary of Contents for KISANKRAFT KK-BC2-JP30

  • Page 1 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 2 Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 3 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Operation Manual KisanKraft Machine Tools Pvt. Ltd. Sri Huchhanna Tower, #4,1 Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA ♦ Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦ ♦ Ernakulam ♦ Guwahati ♦ Patna ♦ Hinudpur ♦ Hubli ♦ Hyderabad ♦...
  • Page 4: Table Of Contents

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 CONTENTS BEFORE GETTING STARTED ............... 7 SAFETY SYMBOLS ..................7 SAFETY INSTRUCTIONS................8 PRODUCT OVERVIEW ................13 TECHNICAL SPECIFICATIONS ..............15 INSTALLATION – ASSEMBLY ..............16 OPERATING INSTRUCTIONS ..............18 SELECTION OF ROTARY CUTTER .............. 21 INSPECTION &...
  • Page 5 KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 6 Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note that the decision of KisanKraft Machine Tools Pvt Ltd with respect to any warranty claim is final.
  • Page 7: Before Getting Started

    KK-BC2-JP30/JP45 , KK-TC2-JP45 BEFORE GETTING STARTED You are now the proud owner of a KisanKraft product. It is made of the finest materials and under a rigid quality control system. It will give you long and satisfactory service. To obtain...
  • Page 8: Safety Instructions

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 UNDERSTAND SIGNAL WORDS AND FOLLOW SAFETY INSTRUCTIONS WARNING: To avoid serious injury You should pay special attention to the above “WARNINIG” signal text given in this manual as failure to do so could result in injury or death to the operator.
  • Page 9 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Environmental Precautions: Never allow children to operate or play with the machine. Never allow anyone without proper instruction to use the unit. WARNING: To avoid serious injury Keep people out of the danger zone. This is a circle of 15m radius around the unit and operator Operate only where firm footing is assured.
  • Page 10 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Always stop the engine to refuel the tank. Handle in a clean and dry place away from fire. DO NOT smoke while handling fuel. Always store petrol in an approved container. DO NOT refuel a hot engine. Wait until the engine has cooled down.
  • Page 11 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 NOTE: Thoroughly inspect the area where the unit is to be used and remove all stones, sticks, wire and other objects that could cause injury if thrown at high speeds. Never operate the unit without proper guards, shields or other safety protective devices in place and properly connected.
  • Page 12 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Always keep both hands on the control handles. DO NOT operate one-handed. DO NOT hold material you are cutting. WARNING: To avoid serious injury After shutting down the engine, keep fingers and feet away from the cutting head until all rotation stops.
  • Page 13: Product Overview

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Precautions after Operation: WARNING: Do not store the unit with fuel in the tank, because a fuel leak could start a fire. Allow the engine to cool before storing in any enclosure. Before cleaning, repairing or inspecting, make certain cutting head has stopped.
  • Page 14 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 KK-BC2-JP45: Nylon cutter Throttle trigger Gear case Engine switch Cutting attachment guard Clutch case Shaft tube Throttle wire Handle Lead wire Harness Engine Suspension eyelet KK-TC2-JP45: Blade Throttle trigger Gear case Engine switch Cutting attachment guard 10.
  • Page 15: Technical Specifications

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 TECHNICAL SPECIFICATIONS  KK-BC2-JP30 KK-BC2-JP45 KK-TC2-JP45 Model Drive System Auto Centrifugal Clutch Spiral Bevel Gear Reduction Ratio 13:19 14:19 16:19 Drive shaft (mm) 3937 3362 3327 Engine (Mitsubishi) TU26 TU43 Engine type 2 – Stroke...
  • Page 16: Installation - Assembly

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 INSTALLATION – ASSEMBLY Installation of Handle (Double handle): nsert the handle into the handle joint and fix it securely using 4 bolts. Installation of cutting attachment guard: Position the cutting attachment guard so that it contacts the edge of the gear case.
  • Page 17 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Rotate blade-fastening nut with plug box  wrench (8) in counterclockwise direction until securely tightened. Installation of Nylon Cutter:  In case of affixing the nylon cutter (9), put parts in the following order: holder A (2), holder B (4), and nylon cutter.
  • Page 18: Operating Instructions

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 NOTE: Use hook to connect and disconnect the band from the hunger of the unit. Don’t work the quick release device with the exception of emergency. OPERATING INSTRUCTIONS (Starting & Stopping the Engine) Preparation before starting the engine: CAUTION: To avoid serious injury.
  • Page 19 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45  When fuel is remaining and the engine is warm, move the choke lever to the fully open position ( mark side). CAUTION: To avoid serious injury.  Do not pull the recoil starter rope out completely. This can damage the unit.
  • Page 20 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45  Perform cutting work by setting the throttle trigger to the required RPM. CAUTION: To avoid serious injury. Do not stop the engine suddenly during high-speed operation as  this can cause engine damage. Stopping the Engine: ...
  • Page 21: Selection Of Rotary Cutter

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 SELECTION OF ROTARY CUTTER Select the blade best suited to your purpose as shown in the diagram below: Selection of rotary cutter: Types of cutters Applications Nylon cutter For soft and low weeds 3-blade cutter...
  • Page 22: Inspection & Maintenance

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 WARNING: To avoid serious injury. Wear safety goggles, safety shoes, gloves and helmet during operation. Nylon cutter: Pull on the cord of the nylon cutter by 12-15 cm. Blade: Blades can be sharpest from the edge to one third up the shaft. When mowing grass, use two thirds.
  • Page 23 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 CAUTION: To avoid serious injury. The adjustment of the carburetor is usually not necessary, since it is adjusted at the optimum position when delivered from the factory. If the fuel is adjusted extremely lean, it may cause the seizure of the engine.
  • Page 24 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 MAINTENANCE AFTER EVERY 25 HOURS OF OPERATION Air Filter Consult your authorized dealer for service. Move the choke lever to the closed  position.  Remove the air filter cover (1). Remove the air filter element (2) ...
  • Page 25: Storage

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45  Spark plug cleaning Electrode Gap (A) Check I  Reset: Check the electrode gap and reset it, if necessary according specifications. Never reinstall damaged spark plug. Replace with a new part NOTE: Always use the recommended type of spark plug...
  • Page 26: Troubleshooting

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 TROUBLESHOOTING Problem Probable Cause Action to be taken Clean and Replace the fuel Water may be mixed with fuel mixture When the machine dose not start at all Intake of fuel is may be Use 2-stroke mixed fuel in...
  • Page 27: Parts Diagram & List (Kk-Bc-Jp30)

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 PARTS DIAGRAM & LIST (KK-BC-JP30) Engine Parts 1. Crankcase System Part No KK Part Name Part No Part Name E1-1 Crankcase Assy E1-7 Oil Seal E1-2 Screw & Washer E1-8 Oil Seal E1-3 Bolt & Washer...
  • Page 28 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 2. Cylinder & Top Cover System Part No Part Name Part No Part Name E2-1 Cylinder E2-5 Guide Cover Assy/Cover Top E2-2 Gasket Cylinder E2-6 Screw & Washer E2-3 Bolt SCH E2-7 Washer E2-4 Bolt STUD...
  • Page 29 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Part No Part Name Part No Part Name E3-1 Crankshaft Assy E3-5 Circlip-Piston Pin E3-2 Piston E3-6 Needle Bearing-Piston Pin E3-3 Piston Pin E3-7 Key-Crankshaft(Woodruff) E3-4 Piston Ring E3-8 Nut Conical SPG 4. Fly Wheel Magneto System...
  • Page 30 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 5. Carburetor System Part No Part Name Part No Part Name E5-1 Gasket-Insulator E5-16 Diaphragm E5-2 Insulator E5-17 Gasket E5-3 Screw & Washer E5-18 Diaphragm E5-4 Gasket-Carburetor E5-19 Gasket E5-5 Carburetor E5-20 Jet Main E5-6...
  • Page 31 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 6. Air Cleaner System Part No Part Name Part No Part Name Air Cleaner Inside Cover/Case Air Cleaner Outside E6-1 E6-5 Cleaner Cover/Cover Cleaner E6-2 Bracket E6-6 Screw & Washer E6-3 Screw & Washer E6-7...
  • Page 32 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 8. Clutch System Part No Part Name Part No Part Name E8-1 Clutch Shoe Assy E8-4 Clutch Bolt E8-2 Shoe Clutch E8-5 Washer B-Clutch E8-3 Spring-Clutch E8-6 Washer A-Clutch 9. Recoil Starter Assy Part No...
  • Page 33 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 10. Fuel Tank System Part No Part Name Part No Part Name E10-1 Fuel Tank Assy E10-8 Bush E10-2 Fuel Tank Lid/Tank Cap Assy E10-9 Petrol Filter/Filter Fuel E10-3 E10-10 Hose Fuel E10-4 E10-11 Valve Breather...
  • Page 34 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 BODY PARTS-KK-BC-JP30 1. Handle & Fitting Part No Part Name Part No Part Name B1-1 B1-13 Left Handle Grip B1-2 Cap Up-Handle/Handle Joint A B1-14 Wire Holder B1-3 Bracket Handle/Handle Joint B B1-15 B1-4 Cap Lower-Handle/Handle Joint C...
  • Page 35 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 2. Gear Case & Driving Apparatus Part No Part Name Part No Part Name B2-1 Gear Case Assy B2-6 B2-2 Outer Pipe/Main Pipe C.P B2-7 Socket Screw B2-3 Drive Shaft/Main Shaft B2-8 Stand-Clutch Comp B2-4...
  • Page 36 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 4. Gear Case Assy Part No Part Name Part No Part Name B4-1 Gear Case Assy B4-11 Holder A/Cover C.P B4-2 Gear Case B4-12 Holder B B4-3 Gear/Bevel Gear B4-13 Saw Lock Nut B4-4 Gear Shaft/Spline Shaft...
  • Page 37: Parts Diagram & List (Kk-Bc2 - Jp45 & Tc2 - Jp45)

    BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 PARTS DIAGRAM & LIST (KK-BC2 - JP45 & TC2 - JP45) Engine Parts 1. Crankcase System Part No Part Name Part No Part Name E1-1 Crankcase Assy E1-6 Screw & Washer E1-2 Bearing 6202 E1-7...
  • Page 38 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Part No Part Name Part No Part Name E2-1 Cylinder E2-6 Screw & Washer E2-2 Gasket Cylinder E2-7 Screw & Washer E2-3 Bolt SCH E2-8 Screw & Washer E2-4 Bolt STUD E2-9 Washer E2-5 Guide Cover Assy/Cover Top 3.
  • Page 39 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Part No Part Name Part No Part Name E4-1 Fly Wheel/Rotor E4-4 Cord Comp/Wire Lead E4-2 Ignition Coil E4-5 Bolt & Washer E4-3 Cap-Spark Plug E4-6 Spark Plug 5. Carburetor System Part No Part Name...
  • Page 40 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Part No Part Name Part No Part Name E5-11 E5-28 Screw E5-12 Lever E5-29 Needle High Speed E5-13 Body E5-30 Spring E5-14 Cover E5-31 Washer E5-15 Primer Pump Assy E5-32 O Ring E5-16 Valve Throttle...
  • Page 41 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 7. Muffler System Part No Part Name Part No Part Name E7-1 Gasket Muffler E7-6 Nut Flange E7-2 Muffler E7-7 Screw & Washer E7-3 Pipe Tail E7-8 Gasket-Muffler(Cover) E7-4 Gasket-Tail Pipe E7-9 Screw & Washer E7-5 Screw &...
  • Page 42 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 9. Recoil Starter System Part No Part Name Part No Part Name E9-1 Starter Assy/Recoil Starter E9-5 Screw & Washer E9-2 Start Reel/Pulley Starter E9-6 Plate E9-3 Screw & Washer E9-7 Label Name E9-4 Bracket-Tank 10.
  • Page 43 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Part No Part Name Part No Part Name E10-1 Fuel Tank Assy E10-9 Bush E10-2 Fuel Tank Lid/Tank Cap E10-10 Petrol Filter/Filter Fuel E10-3 E10-11 Valve Breather E10-4 E10-12 Clip E10-5 Fuel Pipe Grommet E10-13...
  • Page 44 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71011-153 36007-154 Left Handle Grip Cap Up-Handle/Handle Joint Harness Assy/ 51009-143 36063-206 Shoulder Band Bracket-Handle/Handle Joint 51010-146 71038-168 Cap Lower-Handle/Handle 51013-122 412N0620 Socket Screw Joint(C) Safety Guard...
  • Page 45 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71008-319 Gear Case Assy 71010-140 71130-131 Outer Pipe/Main Pipe C.P 416N0635 Socket Screw 64011-234 Drive Shaft/Main Shaft 11024-130-09 Stand-Clutch Comp Holder Assy/Hanger Band 71012-146 11027-119 Cover Metal/Stabilizer Assy 3.
  • Page 46 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71008-319 Gear Case Assy 913B6001 Bearing 6001 51001-266 Gear Case 919B6202 Bearing 6202 C3 64001-140 Gear Shaft/Spline Shaft 61002-107 Oil Seal (TC20357) 78002-173 Pinion/Bevel Pinion 812V1200 Stop Ring/ C. Snap Ring...
  • Page 47 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71011-149 464L-0410 (+)Tapping Screw Cap Up-Handle/Handle 51009-142 661L-0400 Spring Lock washer Joint (A) Bracket Handle/Handle Joint 51010-145 68028-103 Wire band Cap Lower-Handle/Handle 51013-121 71041-186 Left Handle Assy...
  • Page 48 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name Holder Assy 2/Hanger 71008-307 Gear Case Assy 71012-121 Band Assy 71130-157 Outer Pipe/Main Pipe CP 71010-214 64011-219 Drive Shaft/Main Shaft 11024-130-09 Stand-Clutch Comp Holder Assy 1/Hanger 71012-130...
  • Page 49 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71008-307 Gear Case Assy 61001-121 Spline Sleeve 51001-258 Gear Case 11001-164 Holder (A) 78001-148 Gear/Bevel Gear 11002-142 Holder (B) Gear Shaft/Spline 64001-157 31001-106 Saw Locknut Shaft 913B-0629...
  • Page 50 BRUSH CUTTER KK-BC2-JP30/JP45 , KK-TC2-JP45 Ref No Part Name Ref No Part Name 71008-318-104 Gear Case Assy 913B-0629 Bearing 51001-267-104 Gear Case 912B-6000 Bearing 64001-144 Gear Shaft/Spline Shaft 913B-6000 Bearing 78002-170 Pinion/Bevel Pinion 919B-6201 Bearing 78001-150 Gear/Bevel Gear 61002-128 Oil Seal...
  • Page 51: 2-Stroke Gasoline Engine-Manual

    Use the engine after reading and understanding also the manual of  equipment driven by the engine. Keep the manuals at a safe place where you can consult whenever you may  need it. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 51 of 68...
  • Page 52: Www.kisankraft.com

    Make sure to stop the engine whenever the work is interrupted or moving the  engine to another place.  Do not operate the engine alone. (It must be connected to the driven equipment when it is operated.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 52 of 68...
  • Page 53: Www.kisankraft.com

    Exhaust outlet (Types vary depending on the specifications) Engine switch (Types vary depending on the specifications) Clutch 10. Ignition plug cap 11. Air cleaner 12. Carburetor 13. Priming button : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 53 of 68...
  • Page 54: Www.kisankraft.com

    Revolution speed could rise unexpectedly when the external wire of the throttle wire comes off from the position. NO PLAY Driven equipment may fail to stop even if the throttle lever is returned : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 54 of 68...
  • Page 55: Www.kisankraft.com

    2-Stroke Petrol Engine INSPECTION OF RESPECTIVE SECTIONS Make sure to inspect these sections before operating the engine. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 55 of 68...
  • Page 56: Www.kisankraft.com

    (at the mark) While holding down the engine firmly, grasp the recoil starter grip and pull vigorously : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 56 of 68...
  • Page 57: Www.kisankraft.com

    (To be left in the operating position) normal. Clean the slot to restore the normal condition. Depending on specifications, the starter lever may be provided at the throttle wire side. : www.kisankraft.com : www.kisankraft.com : info@kisankraft.com : info@kisankraft.com : +91.80. 22178200 : +91.80.
  • Page 58: Www.kisankraft.com

     Do not touch the engine body, especially the muffler, during or immediately after stopping the operation. (There is risk of burn.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 59 of 68...
  • Page 59: Www.kisankraft.com

    Do not touch the ignition plug cap or high-voltage cord during operation. (There is risk of electric shock or physical injury.) Do not operate the engine with the muffler or air cleaner cover removed  : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 60 of 68...
  • Page 60: Www.kisankraft.com

    When it is necessary to adjust, consult your dealer. Do not decrease the thickness of fuel too much. (It could result in the seizure trouble of engine.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 61 of 68...
  • Page 61: Www.kisankraft.com

    Cleaning and service at respective sections  Clean thoroughly around the muffler.  Clean the cooling fins and the cooling air inlet. Inspect and retighten bolts and nuts.   Inspect the fuel leakage. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 62 of 68...
  • Page 62: Www.kisankraft.com

    Make sure to clean spilled fuel sufficiently before using the engine.   Do not wash the engine with water.  Do not change the setting revolution speed carelessly. (Consult your dealer when changing the revolution speed.) : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 63 of 68...
  • Page 63: Www.kisankraft.com

    The Company reserves the right to change or correct the contents of this manual without prior notice or obligation GENERAL MACHINERY & SPECIAL VEHICLE HEADQUARTERS MEIKI GASOLINE ENGINE DEPARTMENT ADMINISTRATION SECTION 1-Takamichi, Iwatsuka-cho, Nakamura-ku, Nagoya 453-8515, Japan Tel: 81-52-412-1278, Fax: 81-52-412-7811 : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 64 of 68...
  • Page 64: Www.kisankraft.com

    PRODUCT RANGE KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel Backpack Brush Cutter Sprayers and Accessories...
  • Page 65: Www.kisankraft.com

    Wide Range of Products for Every Need MISSED CALL: 07676065555 For more information give Many of our products have BIS: ISI certification. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 66 of 68...
  • Page 66: Www.kisankraft.com

    KisanKraft or its manufacturers make no warranty with respect to trade accessories not manufactured or sold by them. What is not covered: The warranty shall become null and void and neither KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers...
  • Page 67: Www.kisankraft.com

    Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority to increase or alter the obligations of this warranty. Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer if the product is resold by the first buyer.

This manual is also suitable for:

Kk-tc2-jp45Kk-bc2-jp45

Table of Contents