Instructions For Assembly; List Of Spare Parts - Kettler X5 Assembly Instructions Manual

I Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
I A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse
pedalling result from engineering and are absolutely safe.
I The exercise cycle has a magnetic brake system.
I The equipment is independent of revolutions per minute.
I Please ensure that liquids or perspiration never enter the
machine or the electronics.

Instructions for Assembly

I Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
I Please note that there is always a danger of injury when
working with tools or doing manual work. Therefore please
be careful when assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
List of spare parts page 22-23
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: Art.no. 07685-000 / spare-part no. 10100030
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may
be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the ori-
ginal box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material;
if fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
I Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I Do not use corrosive or abrasive materials to clean the
equipment. Ensure that such materials are not allowed to pollute
the environment.
I Nobody may be in the moving range of a training person
during training.
not cause any danger. There is always a risk of suffocation
if children play with plastic bags!
I The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be
replaced.
I For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly
and safely (local refuse sites).
KETTLER (GB) Ltd.
GB
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach · Virginia VA
23450 USA
http://www.kettlerusa.com
5