Tapp Tapplock lite User Manual page 11

Morse code Mode
Morse code is a backup access mode. It allows you
to unlock your device using long / short
combinations by pressing down on the shackle of
the lock (power button). Morse code gives you
access to your Tapplock without your fingerprint or
your phone.
Follow the on-screen instruction in the Tapplock app
to set up your custom Morse code. The status
indicator will be
indicator will be
Press down on the power button three (3) times to
enter Morse code mode. The status indicator light
will be purple.
If you are having trouble getting to Morse code
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press the power button three (3) times
until the status indicator light turns purple.
white for a long hold. The status
for a short hold.
blue
11