General Information…………..………………………………………………………………..3 Introduction..……………………………………………………………………………………..3 Scope of delivery..…..………………………………………………………………………….3 Security.....………………………………………………………………………………….4 Intended use of the device........…………………………………………..4 General information..…………………………………………………………………………..4 Dangers and protective measures..…………………………………………………………4 Specifications..….……………………………………………………………………………..5 Technical data..………………………………….…………………………………………..5 Features...…………………………………………………………………………………..6 Assembling and commissioning..……………………………………………………...6 Operation...………………………………………………………………………………..……..7 Troubleshooting………………………………………………………………………………9 Maintenance..……………………………………………………………………………….10 Disposal..……………………………………………………………………………………10 Warranty......………………………………………………………………….11 Contact…………………………………………………………………………………………11 Radio operation………………………………………………………………………………11 Manual Halo 3.0 2 of 13 14.06.2019...
General information Introduction Thank you for purchasing a product from the Argus series. In order to know all functions of the product, we recommend to read this manual carefully. Scope of delivery Halo 3.0 Fan Set: 3x RGB Fan 1x Control unit 1x Remote control 1x Button cell CR2025 Halo 3.0 Fan:...
Security Intendend use of the device This equipment is designed to be used only for installation and operation in a computer chassis and for connection to computer power supplies or motherboards within confined spaces. Do not use or store the device in damp rooms or near water. Do not operate the device near heat sources.
as possible. Make sure all cables are firmly connected to the device. Keep the device away from children. Do not operate the device with wet hands. Make sure that the device is not dusty (can cause overheating and fire). Pay attention to a sufficient heat dissipation of the device (can cause overheating and fire).
Preparation: Mount the fan(s) in a suitable location in your case using the included screws. Place the controller to a suitable location in your chassis. Pay attention to the length of the connection cables, which must be routed from each fan to the controller. Connect the fans to the controller.
Page 8
function via the switch) or another unused switch on your front panel or an additional switch that you install anywhere on your case. If you have connected the controller with the switch, you can select two fan speeds by pressing the switch. The control option via the remote control is retained.
Replacing the battery: Open the battery compartment on the back of the remote control by pushing the small tab inwards while pulling out the battery holder. Remove the battery and reinsert a new CR2025 battery as shown on the back of the remote control. Do not dispose of the battery in the household waste.
Maintenance Basically, fan and LED Strip require no maintenance. But intook dust can contaminate fans and stripes and can cause overheating and fire. Therefore you should clean the fans and stripes from time to time. This dust can be blown by compressed air from the fan / strip. To blow it out yourself, disconnect the power adapter from the main grid.
Warranty We grant our product a warranty of 24 months from the date of purchase when used properly. To process the warranty claim, please contact your retailer with your proof of purchase. We do not guarantee at: missing or damaged warranty seal, negligent behavior, non-observance of the operating instructions, improper use, misuse of any kind, malfunction due to external influences, damage due to force majeure, damage caused by manipulation, extension, update or modification of hardware or software, Damage caused as a...
Need help?
Do you have a question about the Halo 3 Fan Set and is the answer not in the manual?
Questions and answers