Nevir NVR-9545CVT Instruction Manual page 18

ASSEMBLY
OPERATING INSTRUCTIONS
Note: It is normal when the heaters are turned on for the
first time or when they are turned on after having been
used for a long
period of time the heaters may emit some smell and
fumes.This willdisappear when the heater has been on a
short while.
First, please choose a suitable location for the heater，
taking into account the safety instructions above.
Insert the plug of the heater into a suitable socket.
Turn the thermostat knob fully in a clockwise directions to
the maximum setting.
Turn on the heating elements by means of the rocker
switches on the side panel.When the heating elements are
on the switches will illuminate.For maximum heat output
both switches should be on.
Before using the heater，the feet（
supplied separately in the cartoon），
must be fitted to the unit. These are to be
attached to the base of
the heater using the 4 self-tapping screws
provided，taking care to ensure that they
are located correctly in the bottom ends of
the heater side moldings.
18