Karaoke
•
You can plug the microphone (included)in the back MIC JACK.
•
Adjust the mic volume with the knobs on the back.
•
Chose your preferred device mode and start play.
•
Sing!
BT
•
Turn off the BT functionality of other devices that are already paired with your unit.
•
Press button to turn on the unit.
•
Press MODE button to select BT mode. The LED indicator turns blue.
•
Turn on BT functionality on your BT device. Typically, BT controls are found on the device's tools or
settings menu (see your user manual).
•
Turn on BT connectivity and make your device ‚discoverable".
•
Clean out the paring list on your BT device.
•
Choose ‚add a new BT device' or ‚setup BT device' on your device. It will start to search. Once „Kara-
boom" shows on your device, select it. If your device prompts you for a pass code, please enter 0000.
If the pairing attempt fails or times out, please start pairing procedure again (see steps 2-6).
•
After your device and the tower have connected each other, a sound can be heard.
•
Make sure the BT connection between the unit and the device is active.
•
Press Play/Pause button to pause playback, press again to resume playback.
•
Press button to skip forward to next track and to skip backward to previous track.
LEDs
•
Turn the LEDs on/off with the LED switch on the rear (14). In the upper switch position, the music sensi-
tivity is high, in the lower position the sensitivity is low. Middle position: LED light effects off.
11