Advertisement
TIPS FOR BEST PERFORMANCE:
Keep the unit away from:
potential sources of electrical interference.
Equipment that potentially causes interference
includes ceiling fans, home security systems,
microwaves, PCs and cordless phones (handset
and base).
large metal surfaces and objects. Large objects
and wide surfaces such as glass, insulated walls,
fish tanks, mirrors, brick and concrete walls can
also weaken the wireless signals.
Use the device in upright position; do not close the
ventilation holes.
LED
Power
Wireless
5 GHz
& 2.4 GHz
LEGEND
a) Internet
b) Gateway
c) Please wait for 3 minutes
d) Please wait for 5 minutes
e) Hi-Fi system or Speaker
f) USB disk
g) USB printer
STATUS
Off
Solid white
Flashing white
Off
Blinking green
Blinking green
(4s ON, 4s OFF)
Green
Red
Use of USB 3.0 flash disk is not recommended
as it may have adverse effect on the wireless
performance. It is also recommended to attach
hard disks to the USB port with a 20 cm cable.
Storage temperature range of -40 °C ~ +70 °C and
humidity range of 0% ~ 90% are recommended.
NOTE
Return to the factory settings to change
operation modes: smoothly press the
reset button with a metal paperclip (in
a small opening on the rear panel) for
10 seconds. The LEDs in the front will
temporarily "shimmer" and the unit
will reboot (in about 3 minutes) to the
factory settings.
No power.
Power ON
The device is not ready, please wait.
Wireless radio is not active.
Connecting... Please wait.
The device is unconfigured. Please install the device following
installation instructions.
Wireless connection established (good signal strength).
Connection error or weak signal. Please try installing the
Range Extender at another location closer to the gateway.
GENERAL DATA
Power consumption in operation: max. 18 W
Power consumption in standby: 6.2 W
Operating temperature: 0 °C ~ +40 °C
Storage temperature: -40 °C ~ +70 °C
Humidity range: 0% ~ 90%
EVENT
Advertisement
