Ansmann Racing xMove 2.0 Ultimate Instruction Manual page 9

5.3.2 According to press ◄ DEC/INC ► key you can inquire
the individual voltage of each batteries and
final voltage etc. continually as following (you need
to connect the balance plug):
xMove 2.0 Ultimate
You can check the individual voltages of each cell in the battery pack
while using the individual connection cable to the battery.
The final voltage will be reached at the end of process.
You can inquire the safety capacity.
You can the safety time inquire.
You can use the 3-pin port as an USB port or inquire the safety
temperature value.
It shows the external temperature when the temperature sensor is
connected you can inquire.
This shows the present voltage of input power.
9