Table of Contents
Advertisement
Cordless Kettle
OPERATING INSTRUCTIONS
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is
recommended that you clean your kettle before
use by boiling a full kettle of water twice and
then discarding the water.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove it from the power
base and open lid by lifting lid handle, fill with
the desired amount of water to the water
level. Always fill the kettle between the
minimum (0.5L) and maximum (1.7L) marks.
Too little water will result in the kettle
switching off before the water has boiled.
NOTE: Do not fill the water over the maximum
level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place
before connecting the power cord to the outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Move
the switch below the handle down. The
indicating light will light up. Then start to boil
the water. The kettle will switch off
automatically once the water has boiled. You
6
Advertisement
Table of Contents
