LocknCharge FUYL Cell Operating Instructions Manual

Advertisement

Quick Links

Operating instrUCtiOns
FUYL Cell™
www.lockncharge.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FUYL Cell and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LocknCharge FUYL Cell

  • Page 1 Operating instrUCtiOns FUYL Cell™ www.lockncharge.com...
  • Page 2 To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by LocknCharge. is limited to the cost of repairing or replacing the failed product or component at the discretion of LocknCharge...
  • Page 3 LHS upper/lower, front and rear fixing holes. The RHS holes are in the Laptop spaces - front and rear. Turn the next FUYL Cell in the stack upside down and locate the M6 studs in the joiner ring, then fix the FUYL Cell in place. Locate the third FUYL Cell in the same way.
  • Page 4 If no pedestal is being used under the stack, plug the top FUYL Cell into the ‘hidden’ socket inside the left cover of the FUYL Cell below then plug that FUYL Cell into the ‘hidden’ socket of the bottom FUYL Cell, then run the lead from the bottom FUYL Cell through the rubber grommet in the side of the bottom laptop space, through the back of the space and exit out the right hand side grommet where it can be plugged into an adjacent powerpoint.
  • Page 5 The final process is to align the doors so that they fit evenly over the locking pins and are in line with each other. Once the FUYL Cell is secured it may be necessary to re-align the doors so that they fit properly. Using the small Allen key, adjustment...
  • Page 6 In the event that a defect, malfunction or failure occurs or is discovered during the warranty period, LocknCharge will repair or replace, at its option, the products which in the reasonable judgment of LocknCharge are deemed defective. Replacement products or parts used may be new or refurbished and may show signs of use but be otherwise fully serviceable and covered by the remainder of the Warranty Period.
  • Page 7 Responsible Party: Lock and Charge USA Inc, 307 6th St. W. West Fargo, ND 58078-1533, (701) 630-9357, info@lockncharge.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 8 www.lockncharge.com...

Table of Contents