Chamberlain LiftMaster 976LM Security+ Quick Start Manual

For use with any
orange "Iearn" button.
Personalized Password: Up to 10,000 possible combinations.
Password can be easily changed if desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be limited to
While your password remains c onstant until y ou
change i t,thecode between theKeyless E ntry andthereceiver
th
ci
TheEnterbuttonwill transmit o nlythelast
The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.NOTICE:
SETTING THE PERSONAL ENTRY PASSWORD
We recommend that you program your password now, before you install the Keyless Entry. Then you can test the reception
at the mounting location before you proceed further.
USING THE MULTI-FUNCTION DOOR CONTROL
lz
ue
1. Enter four digit personal identification
number (PIN) of your choice on the keypad.
Then press and hold ENTER.
2. While holding the ENTER button, press and
hold t he LIGHT button on the Multi-Function
DoorControl.
3.Continue holding the ENTER and LIGHT
buttons while you press the push bar on the
Multi-Function Door Control (all three buttons
are held).
4. Releasebuttonswhen the motor unit lights
ll
are not installed, two clicks will be heard.
PRQFESSIONAL
garage door openers having an
or
or
100 b`II`
presse ec ion can
|Jl
__
ll
35
Model 976LM
Toprevent p ossible SERIOUS I NJURY or DEATH from moving
gate or garage door.
`htf
•I tlld tl
or
NEVER permit children to operate or play with gate or door control
push buttons or remotecontrol transmitters.
Activate gate or doorONLY whenit can be seen clearly, i s properly
adjusted,
and t here are no obstructions
ara door.
To complywith FCCand or lndustry Canada (IC) rules.adjustment or modificationsof
this receiver and/ortransmitter are prohibited,exceptlor changingthe code setting or replacing
ARE no onien u sen
the
Tested t o Comply w ithFCC Standards FOR HOME OROFFICE USE. O peration is subject to the
following two conditions:(1) this device may not cause harmfulinterference, a nd(2) this device
must a ccept any interference received, including i nterference that may cause undesired operation.
USING THE "LEARN" BUTTON
|I
1. Press and release the "learn" button on motor
unit. The learn indicator light will glow
steadily for 30 seconds.
2. Within 30 seconds, enter
identification number (PIN) of your choice on
the ke ad. Then press and hold the ENTER
3. Release the button when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
Side two contains instructions for installing the Keyless
Entry, c hanging the personal e ntry password andsetting
976LMC Security-I-®
Entry
tor
ml
or
todoor travel.
four digit personal
:§|
|l