LOCKEY M210 Instructions

Failure to follow the instructions could
result in damage to your lock, so
please read carefully.
1) Hold the outside body in the horizontal
position. Remove the 2 red screws.
Carefully remove the plate, as there
are many springs attached to it.
2) Important: You must turn the knob
to the clear position and hold in that
position until you have completed
the code change. By not holding
the knob in the clear position, you
could damage the lock and void the
warranty.
3) There are BLUE (non-code) and RED (code) tumblers. Your code is made up of red tumblers
always prefixed by turning knob to clear.
While continuing to hold knob in clear position, use tweezers to lift out code/non-code tumblers
you wish to change.
Digital Door Lock
How to Change the Code
Important:
Hold knob in
clear position,
right or left, while
changing code
Turn & Hold