Ena Heat Manual ________________________________________________________________________________ CE DECLARATION OF CONFORMITY MICERIUM S.p.A. VIA G. MARCONI, 83 16030 AVEGNO (GE) ITALY Tel.: (+39) 0185 7887870 Fax: (+39) 0185 7997970 DECLARE UNDER OUR EXCLUSIVE RESPONSIBILITY THAT THE PRODUCT : ENA HEAT COMPOSITE HEATING CONDITIONER Ref.
Since the 1980’s Micerium S.p.A. has been introducing innovative products and receiving prestigious achievements in the dental industry. Micerium S.p.A., to confirm its continuous involvement to fulfil its Customers requirements, applies from 1998, the most comprehensive quality system that ensures a good quality management in all the stages from design to development, manufacture, installation and service.
INTENDED USE: Ena Heat Composite Heating Conditioner allows the use of composite at a clinically ideal temperature during its application in the oral cavity and in the laboratory. It can also be used to heat hypochlorite and anaesthetics. Any other use is forbidden.
Page 7
ACDC adapter they are damaged MAINTENANCE: 1. Tool service must be performed only by qualified repair personnel authorized by Micerium S.p.A. Service or maintenance performed by unqualified repair personnel are not allowed and could result in injury. 2. When servicing an equipment, use only identical replacement parts. Follow instructions in the Maintenance Section of the Instruction Manual.
This manual must be considered as an integral part of the machine and must be “kept for future reference”. If this manual is damaged or lost, please contact the Micerium’s sales office to request a replacement copy. Micerium S.p.A. reserves the right to update machinery and manuals without the obligation of updating any previous revisions, unless there is an exceptional change made in the instructions.
Ena Heat Manual ________________________________________________________________________________ CHAPTER 2 HEATER SPECIFICATION 2.1 INTRODUCTION The use of Ena Heat CHC3 Composite Heating Conditioner is allowed only to well trained operators. The machine must be connected to an electrical system (tension 100-240VAC 50/60Hz, ) by using the...
INSTRUCTIONS FOR USE 3.1 INTENDED USE Ena Heat CHC3 Composite Heating Conditioner has been designed to keep composite (syringes and tips) at a clinically ideal temperature for its application in the oral cavity and in the laboratory. The first temperature (T1: 39° C = 102.2° F) is perfect to heat composite for build up and to heat anaesthetics and hypochlorite;...
Ena Heat Manual ________________________________________________________________________________ Fig. 2: Ena Heat (back view detail) 1. On/off switch 2. T1/T2 temperature selector Power supply 3.3 HOW TO USE 1. Connect the ACDC adapter to the heating unit and connect it to a 110-240 V electrical socket.
Ena Heat Manual ________________________________________________________________________________ CAUTION T1: (corresponds to 39° C = 102.2° F) To heat composite for build up, to heat anesthetics and hypochlorite. T2: (corresponds to 55° C = 131° F) To heat composite for luting CAUTION In table at Point 2.3 the mean times for heating at room-temperature of 20° C (68° F) are reported.
Ena Heat Manual ________________________________________________________________________________ CHAPTER 4 CUSTOMER CARE & WARRANTY 4.1 CUSTOMER CARE The control of all functions, both function and security, is operated by a microcontroller to supervise very clearly the proper conduct of the activities of heating and maintaining the temperature. During heating, the slope of the temperature curve is monitored to verify that the increment is at least 1°...
The right to exchange the complete unit for a new one is excluded. Any parts replaced during the guarantee period must be returned to Micerium S.p.A., who will supply a new part. Should the replaced part not be returned, it will be billed to the user/buyer 4.3 TECHNICAL SERVICE...
Need help?
Do you have a question about the ENA HEAT and is the answer not in the manual?
Questions and answers