Performance Tool W50012 Owner's Manual

STORAGE/CLEANING
• It is recommended that you clean the device after each use. Do not wash or clean the
vacuum motor housing with water. Use only dry cloths, brushes or compressed air.
• If possible, the motor housing should be always kept free from dust and debris.
• Wipe the device with a clean cloth or blow it with low pressure compressed air.
• Do not use water or chemical cleaning agents for cleaning the housing.
• Be careful to prevent water from penetrating any part of the vacuum.
• Disconnect attachments. Check to ensure there is no blocking debris present.
• Press both Canister release buttons to disconnect the canister. Remove the filter by pulling
on the center portion of the insert, and properly dispose of collected dust, debris, etc.
• If necessary, use mild soap and warm water to clean the canister and filter. Allow both to
thoroughly dry before reinserting filter and replacing canister on vacuum.
• Vacuum attachments may be removed from the canister and cleaned with mild soap and
warm water.
• Warp cord tightly, insert vacuum and attachments into storage bag and zip closed. Store
in a cool, dry and safe place.
ENVIRONMENT PROTECTION
Expended electrical equipment can contain substances or materials that are hazardous
and pose a potential risk for environment and human health. Do not dispose of electrically
powered products with household waste. They should be processed in appropriate
facilities. Obtain information on proper waste management from your seller or local
authorities.
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to
place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®
will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid
only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned. For part(s)
after 90 days, please remit your request, postage prepaid to:
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise
applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations
may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the
repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages
may vary from state to state, so the above limitations may not apply in all cases.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
© Copyright 2017 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138