Advertisement
Advertisement
Table of Contents
Related Manuals for SAFARI Montage G3011
Summary of Contents for SAFARI Montage G3011
- Page 1 ® SAFARI MONTAGE G3011 BROADCAST ENCODER INSTALLATION AND SETUP GUIDE...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS The presence of this symbol is to alert the installer and user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to produce a risk of electric shock. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE, AND DO NOT OPEN THE DEVICE. -
Page 3: Product Description
– all without the need for a plugin. The SAFARI Montage Broadcast Encoder is ideal for streaming school news, and supports up to 120 clients (classrooms) directly. When paired with this encoder, SAFARI Montage IPTV & Live Media Streaming solutions will dynamically select the optimal streaming format through client auto-detection, delivering UDP multicast or HLS ABR unicast streams. - Page 4 ® SAFARI Montage Encoder Specifications AC-DC Adaptor Power AC input: 100-240 V DC output: 19V/3.4A Video Encoding H.264/AVC HLS ABR: 576p, 720p, 1080p UDP Multicast: 1080p Video Encoding Resolutions CDN RTMP: 720p Bitrates: Variable Audio Encoding AAC @ 128 kbps...
-
Page 5: Installation And Configuration
Please read these instructions in their entirety before you begin: • Review any questions with Technical Support in advance. Please note that SAFARI Montage Technical Support is available Monday – Friday from 8 a.m. to 6 p.m. Eastern Time, and they may be contacted by telephone at 800-782-7230 or online via http://www.safarimontage.com/support/. - Page 6 Initial Network Configuration: 1. Connect a monitor and keyboard to the encoder. 2. Connect the encoder to the network. 3. Power the encoder via the supplied power adapter or cord. 4. Configure the network settings as required to conform to the local network addressing scheme. a.
- Page 7 f. Enter the desired static IP address and press enter g. Enter the subnet in CIDR notation and press enter h. Enter the Gateway IP address and press enter i. Enter DNS server(s) leaving a space between each address j. The information will be saved and applied to the unit. k.
- Page 8 Set the unit to proper local time to ensure correct playback. Time can be set by going to the Time Settings menu from the main console menu. NOTE: It is recommended that local NTP servers are used with all SAFARI Montage hardware to insure accurate time settings.
- Page 9 5. Set Type (for recording) to M3U8 for ABR and HLS streams, and H.264 RAW TS for UDP streams. 6. Configure additional stream settings as desired, and click on Add to save the new stream. 7. Click on the stream name to navigate to the stream detail page. 8.
- Page 10 3. Enter the CDN URL and then press enter 4. Enter the CDN Key and then press enter 5. Within the next scheduler period (once a minute) the system should notice the stream is configured to broadcast to a CDN and start trying to push to it. NOTES: •...
Need help?
Do you have a question about the G3011 and is the answer not in the manual?
Questions and answers