Advertisement
Use as external Hard Drive
1. Insert the adapter into the external enclosure.
2. Insert a 2.5" SATA Hard Disk into the other side of the external
enclosure and connect it to the SATA connector of the adapter.
3. Close the plastic enclosure and plug the adapter's cable into an
available USB Type-C port of your computer.
4. The adapter and the HDD will be recognized automatically by
the operating system without the need to install drivers.
Important Note
You must partition and format a new and unused hard disk before
using it. If you connect a new and unused hard disk, it will not
appear as a new drive on your computer.
6
Advertisement
