Advertisement
Quick Links
FOLDABLE SHOP CRANE
2 TON
46766
ASSEMBLY & OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright
2002 by Harbor Freight Tools
. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
REV 05/05
Advertisement
Related Manuals for Central Hydraulics 46766
Summary of Contents for Central Hydraulics 46766
- Page 1 FOLDABLE SHOP CRANE 2 TON 46766 ASSEMBLY & OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. © ® Copyright 2002 by Harbor Freight Tools .
- Page 2 There are certain applications for which this product was designed. Do not modify this product and do not use this product for a purpose for which it was not intended. For technical questions, please call 1-800-444-3353. Sku 46766 Page 2...
- Page 3 Caster Wheel (5) is to be attached to each side of the Base (4). For each mid size Caster Wheel (5), slide four (4) Bolts (28) up through a Spring Washer (7) and into Base (4). REV 11/02; 05/05 For technical questions, please call 1-800-444-3353. Sku 46766 Page 3...
- Page 4 Line up the holes at the top of the Suppor t (11) with the second hole down on the Support Post (10). Attach Supports (11) to the Support Post with Bolt (12). Slide on Washer (34) and Spring Washer (35). Tighten on Nut (2). REV 11/02; 05/05 For technical questions, please call 1-800-444-3353. Sku 46766 Page 4...
- Page 5 Post (10) Washers (32 & 33) Nut (18) Bolt (17) Support Post (10) Washers (32,33) Hydraulic Ram (21) Figure 4A -Assembling the Boom Figure 4B-Attaching the Hydraulic Ram REV 11/02; 05/05 For technical questions, please call 1-800-444-3353. Sku 46766 Page 5...
- Page 6 Load must be secure in the Hook (19) with the safety latch fully closed. Make certain that the load is sustained with chains or slings before using the Crane to lift it. REV 05/05; 09/07 For technical questions, please call 1-800-444-3353. Sku 46766 Page 6...
-
Page 7: Troubleshooting Tips
Air in Hydraulic system. Open Release valve, pump handle four full strokes to release air. • • • • • Top off with Hydraulic Fluid. Close the oil fill cap. Close Release Valve. REV 11/02; 04/03 For technical questions, please call 1-800-444-3353. Sku 46766 Page 7... -
Page 8: Please Read The Following Carefully
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. REV 11/02; 05/05 For technical questions, please call 1-800-444-3353. Sku 46766 Page 8... - Page 9 Parts/Assembly Diagram Make certain to set up the Crane on a flat, stable, level surface. REV 11/02; 05/05 For technical questions, please call 1-800-444-3353. Sku 46766 Page 9...