Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for
loose, missing, or damaged parts. If any damage is
observed, a shipping damage claim must be filed
with carrier. Do not use the OEMTOOLS
Battery Analyzer if broken, bent, cracked or damaged
parts (including labels) are noted. Any Digital Battery
Analyzer that appears damaged in any way, operates
abnormally or is missing parts should be removed
from service immediately. If you suspect that the
Digital Battery Analyzer was subjected to shock load
(a load that was dropped suddenly, unexpectedly,
etc.) immediately discontinue use until it has been
checked by a factory authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Digital Battery Analyzer under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar
with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS
cannot be responsible for issues arising from modification. We strongly recommend this product is not
modified and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted OEMTOOLS
determine if it can or should be performed on the product.
4/18
2018 OEMTOOLS
™
DIGITAL BATTERY ANALYZER
TM
Digital
TM
Product!
24359
TM
TM
to