Table of Contents
Advertisement
Quick Links
Add-On Device Quick Start Guide
What's inside:
1x Power cables
What you'll need:
• Phillips screwdriver
All WWAlarm add-on devices have to work with WWAlarm systems
1x Garage door control button
1x Power adapters
2x 18-gauge wires
Garage Door
Control Button
Add-on Device
Quickstart Guide
Model No. WGO2001
2x U-fork wires
• Existing powered garage door opener
Mounting accessories
and double-sided tape
Advertisement
Table of Contents
Summary of Contents for WWAlarm WGO2001
-
Page 1: Quickstart Guide
1x Garage door control button 1x Power adapters 2x U-fork wires 1x Power cables 2x 18-gauge wires Mounting accessories and double-sided tape What you’ll need: • Phillips screwdriver • Existing powered garage door opener All WWAlarm add-on devices have to work with WWAlarm systems... - Page 2 Step 1: Assemble your device and accessories 1. Unpack your device and accessories. 2. Pair the Garage door control button with the Security Shuttle within 1-10 feet to make sure the connection is working well. 3. Connect the included power adapter to the Garage door control button and plug it in.
- Page 3 Step 2: Add a device 1 . Open the WWAlarm app, tap on the the menu button " " and select “Device Management”. 2. Press the add button ‘+’ next to Sensor List. 3. Follow the app instructions to scan the QR code located on the device.
- Page 4 Step 3: Choose Your Installation Method Review the 3 installation options below and refer to the user manual of your specific garage door opener before you install your garage door control button. Option 1: Use it with your wall existing switch With existing wall switch Attach U-fork wires •...
- Page 5 Add-On Device Quick Start Guide Option 2: Replace your existing wall switch Replacing existing switch Remove switch completely • Unscrew your existing garage door wall switch • Locate the two wires that connect to your garage motor. Loosen the screws that hold them in place.
- Page 6 Option 3: Attach it to your garage door motor Attached to motor Wire to garage door motor • Access the wire panel on your garage door motor unit • Locate the two wires that connect to your garage door wall switch. If you have trouble finding them, please refer to the user manual of your garage door motor to determine which wires connect to your wall switch.
- Page 7 1. Insert the loose wires into the bottom of your WWalarm garage door control button (one per hole, the order doesn’t matter) 2. Plug in your WWAlarm garage door control button with the included power cable and adapter, then mount your control button with screws or...
- Page 8 Step 5: Test your garage door opener In the WWAlarm app, navigate to Automation > Garage Door Opener and press the red power button. Your app should now be able to operate your garage door. Troubleshooting Tips If you’re having trouble adding your device, you may need to reset it 1 .
Need help?
Do you have a question about the WGO2001 and is the answer not in the manual?
Questions and answers