Advertisement
3.4.3. Rotate the T-bar clockwise forcing the die into the pipe
(fig.9). Continue to turn until the resistance significantly
increases, undo the T-bar a couple of turns and remove the
ram assembly from the main body.
3.4.4. Remove the block and pipe from the main body (unless you
wish to make a double flare (fig.3B)) and separate the block
from the pipe, check that the flare has no cracks and is
symmetrically formed.
3.5. To form a Double (Female) flare SAE (fig.3.B).
3.5.1. Leave the pipe in the block after completing the bubble flare.
3.5.2. Change the die to the SAE convex die (fig.10).
This will fold the top section of the bubble flare inwards to
form a double flare (fig.3.B).
3.5.3. Follow the same procedure as described in 3.4 to 3.4.4.
Again, check that the flare is symmetrically formed.
3.6. To form a Single Flare DIN (fig.3C).
3.6.1. Follow the procedures laid out in 3.4 to 3.4.4, only this time
select the DIN side of the block (fig.1) and the DIN concave
die.
3.7. Adaptor Driver (fig.11).
For jobs where restricted space makes use of the
hydraulic ram difficult, use the 23mm adaptor driver
in place of the ram.
WARNING! The safe operation of a vehicle, or other equipment, may well depend on the
quality of the flare produced. Discard any flare which is misformed or cracked in any way.
Parts support is available for this product. To obtain a parts listing and/or diagram, please
log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.9
01284 757500
Web
01284 703534
email
fig.1
fig.10
fig.11
www.sealey.co.uk
sales@sealey.co.uk
PFT10 Issue: 2(L) - 29/11/13
Advertisement
