Related Manuals for Yuga CLM920
Summary of Contents for Yuga CLM920
- Page 1 Product Name 4G Wireless Routing DTU User Manual Number of Pages Produce Version V1.02 Date 2019/3/4 4G Wireless Routing DTU User Manual V1.02 Shang Hai YUGE Information Technology co., LTD All rights reserved...
- Page 2 4G Wireless Routing DTU User Manual Update records Version Date Author Description V1.01 2017/8/9 Yuge document group Initial version The hardware revision is V1.3 V1.02 2019/3/4 Yuge document group webUI update Page 1 of 21 Shang Hai YUGE Information Technology co., LTD...
-
Page 3: Table Of Contents
4G Wireless Routing DTU User Manual Contents Chapter 1. Overview........................1 Chapter 2. WEBUI Management System................... 3 2.1 Login..........................3 2.2 System Status........................ 4 2.2.1 Network Status....................4 2.2.2 LAN status......................4 2.2.3 Device status...................... 5 2.2.4 Traffic Statistics....................5 2.3 Basic settings.........................6 2.3.1 LAN Setting....................... - Page 4 4G Wireless Routing DTU User Manual 2.6.2 User management.....................17 2.6.3 Telnet service....................17 2.6.4 Reboot......................17 Page 3 of 21 Shang Hai YUGE Information Technology co., LTD...
-
Page 5: Chapter 1. Overview
4G Wireless Routing DTU User Manual Chapter 1. Overview The 920_DTU is a DTU device based on the Qualcomm MDM9x07 platform. Support 4G full Netcom (depending on the configuration, some versions may not support CDMA or some frequency bands), support Wi-Fi AP function, support Ethernet interface, support RS232 and RS485 interface. - Page 6 4G Wireless Routing DTU User Manual Note: The DC power supply voltage range is 5V to 36V. It is recommended to use the power adapter. The 4G indicator is green, and the 4G will always be on when connected to the network. ...
-
Page 7: Chapter 2. Webui Management System
4G Wireless Routing DTU User Manual Chapter 2. WEBUI Management System The device default settings can work, or you can modify the default settings through the WEBUI management page. The WEBUI management page supports Internet Explorer 11 and higher, Firefox, Chrome, Safari and other major browsers. 2.1 Login Open the browser, enter the address 192.168.100.1 and press Enter. -
Page 8: System Status
4G Wireless Routing DTU User Manual 2.2 System Status 2.2.1 Network Status This page displays the current 4G network status and related information, such as the connected network type (LTE, WCDMA, TD-SCDMA, etc.), signal strength value, MCC/MNC, etc. Note: If you cannot register the network or cannot access the Internet, you can check the status of this page to check whether the SIM card recognizes the normal, current network type and signal strength. -
Page 9: Device Status
4G Wireless Routing DTU User Manual 2.2.3 Device status This page shows the status of the device, such as system time, boot time, device version number, etc. Note: The current time displayed is the time the device is synchronized from the network. If there is a problem with the network connection, the time may be incorrect. -
Page 10: Basic Settings
4G Wireless Routing DTU User Manual Note: The data traffic on the device side may be inconsistent with the carrier. The traffic statistics function depends on the system time. Traffic statistics are not available until the device time is synchronized to the network time. In addition, if the device is often interrupted during use, it may cause inaccurate traffic data. -
Page 11: Wi-Fi Setting
4G Wireless Routing DTU User Manual 2.3.2 WI-FI Setting This setting modifies the Wi-Fi AP SSID name, transport channel, security mode and password. After the broadcast network name is set to deactivate, other devices will not be able to search for this Wi-Fi AP. 2.3.4 Mobile network settings This setting modifies the 4G related parameters. -
Page 12: Pin Management
4G Wireless Routing DTU User Manual 2.3.5 PIN management This page can display the SIM PIN status, activate, disable the SIM PIN function, modify the SIM PIN, and unlock the SIM PIN. In addition, if the function of automatically inputting SIM PIN is enabled, and the PIN code verification is enabled on the SIM card, and the PIN code attempts are 3, the device will automatically input the set PIN code to verify.。... -
Page 13: Mac Filter
4G Wireless Routing DTU User Manual 2.4.2 MAC filter This setting is used to filter the client connected to the WIFI to prevent the illegal client from connecting to the device through WIFI. The default setting is blacklist mode. Under this setting, hosts in the blacklist cannot connect to the device, and other hosts can connect to the device. -
Page 14: Port Map
4G Wireless Routing DTU User Manual 2.4.4 Port Map Port mapping is to modify the data packet of one port of the network network to another port and send it to the set IP address. 2.4.5 DMZ This setting can modify the DMZ host settings. If you need a host on the LAN to use the server, you can set the host IP address as the DMZ host. -
Page 15: Vpn
4G Wireless Routing DTU User Manual In general, IoT NICs may use this feature. 2.4.6 VPN The VPN function is used to access the virtual private network. Can be used to remotely access corporate LANs, etc. Note that the LAN segment of the router cannot conflict with the remote network segment. -
Page 16: Network Mode
4G Wireless Routing DTU User Manual 2.4.8 Network Mode This page is whether the network used by the DTU is a mobile network or an Ethernet network. 2.4.9 WIFI Enable This page is used to turn off or turn on the wifi function. Page 12 of 21 Shang Hai YUGE Information Technology co., LTD... -
Page 17: Ethernet Enable
4G Wireless Routing DTU User Manual 2.4.10 Ethernet Enable If you do not need the Ethernet function, you can turn off the Ethernet here. After turning off the Ethernet, you may not be able to access this page to open the Ethernet function. You can only restore this function by restoring the factory settings button. -
Page 18: Application Setting
4G Wireless Routing DTU User Manual 2.5 Application setting 2.5.1 RS232 The main function of DTU is to use TCP to transparently transmit serial data and server data. This function receives the RS232 serial port data, transmits it to the set server, and can receive the data on the server and transfer it to the device on the RS232 serial port. -
Page 19: Ping Check
4G Wireless Routing DTU User Manual 2.5.3 PING check This function is used to detect whether the device is connected to the Internet. If the device is abnormal and cannot access the Internet, you can restart the device for recovery. Note: This feature consumes 4G mobile data traffic 2.5.4 Reboot when disconnect The disconnection detection function is a function to increase the connection stability of... -
Page 20: Auto Reboot Setting
4G Wireless Routing DTU User Manual 2.5.5 Auto reboot setting To maintain device stability, you can set the device to automatically restart. It can be set to restart every few hours, for example, every 72 hours. It can also be set to restart at a fixed time every day, such as restarting at 00:00 every day, or restarting at 21:00 every day. -
Page 21: User Management
4G Wireless Routing DTU User Manual 2.6.2 User management Modify login and password。 2.6.3 Telnet service Remote access to devices when enabled。 2.6.4 Reboot Reboot the device and restart the device with this setting to ensure that the data has been saved to the system without losing unsaved data.。...
Need help?
Do you have a question about the CLM920 and is the answer not in the manual?
Questions and answers
Dove trovo nome utente
The default username for Yuga CLM920 can be found on the WEBUI login page. It is "admin".
This answer is automatically generated