Belair 3000 Operating Instructions

Toilet seat with an integrated filter

Belair 3000

Operating instructions (E)

Congratulations on your purchase!

Belair is a product that provides for effective removal of odours in

toilet rooms. It upholds the highest standards of comfort,

functionality, quality, design and energy efficiency.

Belair is a toilet seat with an integrated filter that quickly and

efficiently eliminates unpleasant gases before they become dispersed

into the surrounding environment.

Adjustable screws allow for simple assembly and disassembly of the

device on most toilet bowls.

The device requires less than a tenth of the energy of conventional

bathroom ventilation systems and saves on the loss of heating energy

during cold periods of the year.

Please carefully read through the operating instructions in their

entirety before putting the device into operation.

Note!

- Prior to operation, please check to make sure your voltage system

corresponds to the voltage indicated for the device (220-230 volts).

- Never clean the device when the filter housing is open.

- Make sure that no water or other fluid enters the air intake slots. Any

fluid inside the device could cause permanent damage.

- Children or individuals with limited physical, sensory or mental

capacities should only employ this product after a thorough

explanation of how to use devices connected to electric power.

Table of Contents

Need help?

Do you have a question about the 3000 and is the answer not in the manual?

Page 1 Belair 3000 Operating instructions (E) Congratulations on your purchase! Belair is a product that provides for effective removal of odours in toilet rooms. It upholds the highest standards of comfort, functionality, quality, design and energy efficiency. Belair is a toilet seat with an integrated filter that quickly and efficiently eliminates unpleasant gases before they become dispersed into the surrounding environment.
Page 2 (down below). b. Place the Belair 3000 on the toilet bowl and insert the eccentric screws (8) provided with the assembly kit through the eyes on the seat holder (7) and then through the holes in the toilet bowl.
Page 3 Repeated dropping of the seat could damage the device. 3. Cleaning Belair is cleaned like a normal toilet seat with commercially available toilet cleaners and a non-abrasive cloth. Note: Do not clean with a toilet brush or a soaking wet sponge as this could cause water to enter the air intake slots (6).
Page 4 The warranty can be claimed in all countries where Belair is sold by authorised retailers. Excluded from warranty coverage are: damage from improper use, normal wear and tear as well as defects that only insignificantly affect the value or usability of the device.