Do you have a question about the A5853 and is the answer not in the manual?
Questions and answers
John perry
April 21, 2025
How do you clean the dust from inside
1 comments:
Mr. Anderson
May 11, 2025
To clean the dust from inside the EdenPURE A5853:
1. Allow the unit to cool down before cleaning. 2. Use a damp cloth, vacuum cleaner, or dusting brush to clean the housing. 3. Lightly run a vacuum cleaner brush nozzle over the fan grille to remove dust or dirt. 4. Use a vacuum cleaner with an appropriate attachment to clean the air inlets.
Do not use gasoline, paint thinner, solvents, or abrasive cleaners. Do not immerse the fan in water or let water drip into the motor housing.
Please recycle where facilities exist. Check with your Local Authority for recycling advice. Authority for recycling advice. SPECIFICATIONS Model: A5853 Power Output: 24 V DC | 1500 mA Power Input: 100 – 240VAC | 50/60Hz| 1.0A Power Usage: 2-24W...
IMPORTANT INSTRUCTIONS ON/OFF Button WARNING Fan Level Fan Level Up IMPROPER USE OF THIS FAN COULD RESULT IN RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS Down WARNING ANY REQUIRED SERVICE OTHER THAN ROUTINE CLEANING SHOULD ONLY BE Timer Control: Timer Control: PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE AND ANY Less Time...
fan from overturning. Do not run the power cord under carpet. Do not cover • CAUTION: Never insert your fingers or any other objects (hair, clothes, the power cord with throw rugs or runners. Route the power cord away from utensils, knives, screw drivers etc.) into the openings of the guard or close to walking paths so that nobody can trip over it.
Need help?
Do you have a question about the A5853 and is the answer not in the manual?
Questions and answers
How do you clean the dust from inside
To clean the dust from inside the EdenPURE A5853:
1. Allow the unit to cool down before cleaning.
2. Use a damp cloth, vacuum cleaner, or dusting brush to clean the housing.
3. Lightly run a vacuum cleaner brush nozzle over the fan grille to remove dust or dirt.
4. Use a vacuum cleaner with an appropriate attachment to clean the air inlets.
Do not use gasoline, paint thinner, solvents, or abrasive cleaners. Do not immerse the fan in water or let water drip into the motor housing.
This answer is automatically generated